冷延明
LENG Yan-ming(No.3 Oil Production Plant of Daqing Oilfield Company Ltd.

• 1:大庆油田油田有限责任公司第三采油厂

摘要(Abstract)：

针对大庆油田东部过渡带地区存在注采比居高不下、平面压力分布不均衡、吸水差井数较多、注水井方案符合率低、层间矛盾越来越突出、主力油层注水无效循环严重、差油层不吸水比例高、能量补充跟不上、油井增产措施效果差等问题,研究了在注水井上采取细分调整、周期注水、酸化、调剖、注表面活性剂等调整方法,同时在油井上实施补孔、压裂等综合治理措施,提高了注水利用率。实践证明,应用这一系列提高注水利用率的调整方法,能够改善过渡带地区注水开发效果。
The eastern transitional area of Daqing Oilfield is confronted with problems like high production-injection rate,non-uniform plane pressure distribution,large amount of wells with poor water absorption ability,low coincidence rate of injection well plan,worsening bedding surface conflicts,invalid injected water circulation in major reservoirs,high proportion of poor layers without water absorptivity and poor stimulation efficiency caused by insufficient energy supply.Judging from the above problems,studies focusing on injection well adjustments such as subdivision,cyclic waterflooding,acid,profile and surface active agent injection etc.have been conducted,meanwhile,comprehensive treatments like re-perforation and fracturing have been carried out to production wells,through which,the performability of water injection has been enhanced.Practical utilization proves that waterflooding effect could be promoted by the above series of adjustment treatments.

关键词(KeyWords)： 细分调整;周期注水;表面活性剂;注水利用率
subdivision adjustment;cyclic waterflooding;surface-active agent;water injection performability

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 冷延明
LENG Yan-ming(No.3 Oil Production Plant of Daqing Oilfield Company Ltd.

参考文献(References)：

• [1]高志华,翟香云,王建东.大庆油田注水开发后异常地层压力分布规律研究[J].大庆石油地质与开发,2005,24(1):51-53.
• [2]李卫彬,王丽英,孙庆萍.特高含水期厚油层细分挖潜方法研究[J].大庆石油地质与开发,2005,24(1):58-60.
• [3]刘云彬,李永伏.高含水后期周期注水应用的一个实例[J].大庆石油地质与开发,2005,24(5):44-45.
• [4]黄金凤,付青春,高淑明,等.低效循环条带的动态识别与治理[J].大庆石油地质与开发,2005,24(6):48-50.
• [5]黄修平,黄伏生,卢双舫,等.喇嘛甸油田特高含水期注采无效循环识别方法[J].大庆石油地质与开发,2007,26(1):76-78.
• [6]张蕾,刘彬,王红云.油田过多产水问题分类与处理措施[J].大庆石油地质与开发,2007,26(3):60-64.
• [7]韩培慧,么世椿,张淑英,等.大庆油田南二区聚合物与碱/表面活性剂交替注入数值模拟研究[J].大庆石油地质与开发,2006,25(2):75-77.