李铁军,赵运祥,郭大立,柯西军,施生伟
LI Tiejun,ZHAO Yunxiang,GUO Dali,KE Xijun,SHI Shengwei

• 1:西南石油大学理学院

摘要(Abstract)：

压后压降测试分析是目前获取煤层渗透率的有效方法。通过对压裂停泵后压降测试数据进行分析,在Nolte经典模型基础上,结合裂缝闭合后压力分析的线性流和径向流数学模型,运用Horner法产量等效原则及Duhamel叠加原理,创建了储层渗透率的计算方法。并利用逐步最小二乘法,实现井底压力的自动拟合,提高了储层渗透率的求取准确性和效率。新疆煤层气井的实例计算说明了该方法的准确性和可靠性,并证实了XX区块渗透率较高、物性较好,具有较大的开发价值。
The analysis of the pressure drop test after the fracturing is the main method to obtain the permeability of the coal seam. Based on the analysis of the pressure drop tested data after stopping the fracturing pumps and classical Nolte model,integrated with the linear and radial flow mathematical models of the pressure analysis after the fracture closure,with the help of the production equivalent principle by Horner method and Duhamel superposition principle,the calculating method of the reservoir permeability is initiated. At the same time,by the gradually least square method,the automatic match of the bottom-hole pressure is realized,thus the accuracy and efficiency of the reservoir permeability are improved. The calculation case history in Xinjiang CBM well proves the accuracy and reliability of this method,and moreover the facts of much higher permeability and pretty better physical properties for Block XX are confirmed,so much greater development value of the block is shown.

关键词(KeyWords)： 压降测试;煤层渗透率;线性流;径向流
pressure drop test;coal seam permeability;linear flow;radial flow

Abstract:

Keywords:

基金项目(Foundation): 国家科技重大专项(2016ZX05070)

作者(Author): 李铁军,赵运祥,郭大立,柯西军,施生伟
LI Tiejun,ZHAO Yunxiang,GUO Dali,KE Xijun,SHI Shengwei

参考文献(References)：

• [1]NOLTE K G.Background for After-Closure Analysis of Fracture Calibration Tests[R].SPE 39407,1997.
• [2]NOLTE K G,MANIERE J L,OWENS K A.After-Closure Analysis of Fracture Calibration Tests[R].SPE 38676,1997.
• [3]NOLTE K G.Determination of fracture parameters from fracturing pressure decline[R].SPE 8341,1979.
• [4]郭大立,纪禄军,赵金洲,等.煤层压裂裂缝三维延伸模拟及产量预测研究[J].应用数学和力学,2001,22(4):5-10.
• [5]张平,赵金洲,郭大立,等.水力压裂裂缝三维延伸数值模拟研究[J].石油钻采工艺,1997,19(3):53-59.
• [6]郭大立,吴刚,刘先灵,等.确定裂缝参数的压力递减分析方法[J].天然气工业,2003,23(4):83-85.
• [7]许雷,郭大立,孙涛,等.压裂压后裂缝闭合模型及其应用[J].重庆科技学院学报(自然科学版),2012,14(3):47-49.
• [8]张文昌,胡永全,赵金洲,等.校准测试闭合后压降分析[J].断块油气田,2010,17(1):85-87.
• [9]侯晓春,王建平,张文中,等.运用小型压裂测试确定储层参数新方法[J].大庆石油地质与开发,2006,25(2):54-56.
• [10]赵志红,郭建春,岳迎春.利用小型压裂测试确定储层渗透率[J].石油地质与工程,2007,21(6):56-58.
• [11]王飞,张士诚,蔡久杰.一种简便的测试压裂压力递减分析方法[J].西南石油大学学报(自然科学版),2014,36(3):115-120.
• [12]SAID B,DJEBBAR T.Reservoir Permeability Determination Using After-Closure Period Analysis of Calibration Tests[R].SPE70062,2001.
• [13]SAID B,DJEBBAR T.Reservoir Permeability Determination Using After-Closure Period Analysis of Calibration Tests[R].SPE88640,2004.
• [14]张保平,蒋阗,刘立云,等.油藏增产措施[M].北京:石油工业出版社,2002.