预测高陡复杂断块岩性油藏产油量的一种新模型A NEW MODEL FOR PREDICTING PRODUCTION OF HIGH-STEEP COMPLEX FAULT-BLOCK OIL RESERVOIRS
任艳滨,田晓东
REN Yanbin,TIAN Xiaodong
摘要(Abstract):
现有产量预测方法,尤其是Arps递减方程在国内外油田得到广泛应用,有效指导了油田开发。但所应用油田一般规模较大,地层倾角较小,而且一般都是在高含水—特高含水阶段应用。现有产量预测方法多数基于历史产油量数据的拟合进行预测,产量数据越多,油田规模越大、地质情况越简单,准确率越高。对处于中低含水阶段的高倾角复杂岩性油藏,没有开发指标预测应用实例。从基本渗流理论出发,通过应用二项式公式表征油相相对渗透率随含水饱和度的变化规律,拟合砂岩、砂砾岩储层,达到较好效果,同时将油水相对渗透率融入产油量预测模型,使模型具备严格的渗流理论基础,结合重力校正系数,可以准确预测高倾角复杂岩性油藏产油量。在已开发区块应用情况表明,新方法预测精度在90%以上,能够用于产油预测。
The existing production forecasting methods,especially Arps decline equation,have been widely used in the domestic and abroad oilfields and have effectively guided the oilfield development. However,the applied oilfields are generally characterized by a larger scale,smaller dip angle,and usually adopted in the high watercut-extra high watercut stage. Most of the existing predicting methods are based on the match of the historical oil production data,the more the data are,the larger sizes of the oilfields are,the simpler the geological situation is,the higher the accuracy will be. There is no applied example of the development index prediction for the high-dip-angle complex lithologic oil reservoirs in the middle and low watercut stages. From the viewpoint of the basic seepage theory,by means of applying the binomial formula characterizing Krochange with the water saturation,the sandstones and glutenite reservoirs were matched to achieve much better results,meanwhile the Kroare integrated into the oil production predicting model,thus the model can has the strict theoretical basis,and furthermore combined with the gravity correcting coefficient,the production of the high-dip-angle complex lithologic oil reservoir can by accurately predicted. The applied conditions in the developed blocks show that the predicted precision of the new method ismore than 90%,so it can be used for the oil production prediction.
关键词(KeyWords):
高倾角复杂岩性油藏;二项式公式;油水相对渗透率;产量预测模型;校正系数;应用价值
high-dip-angle complex lithologic oil reservoir;binomial formula;oil-water relative permeability;production predicting model;correcting factor;application value
基金项目(Foundation):
作者(Author):
任艳滨,田晓东
REN Yanbin,TIAN Xiaodong
DOI: 10.19597/J.ISSN.1000-3754.201705027
参考文献(References):
- [1]李晓平.地下油气渗流力学[M].北京:石油工业出版社,2008:136-137.
- [2]李传亮.油藏工程原理[M].北京:石油工业出版社,2011:309-310.
- [3]陈元千,邹存友.预测油田产量和可采储量模型的典型曲线及其应用[J].石油学报,2014,35(4):749-753.
- [4]何文祥,杨亿前,马超亚.特低渗透率储层水驱油规律实验研究[J].岩性油气藏,2010,22(4):109-111.
- [5]关恒.基于液油比的特高含水期水驱开发指标预测方法[J].岩性油气藏,2013,25(5):100-103.
- [6]李士伦,孙雷,郭平,等.天然气工程[M].北京:石油工业出版社,2010:89-90.
- [7]张庆辉,李相方,袁海菊,等.考虑非达西的半球面流气井产能公式推导[J].油气藏评价与开发,2011,1(5):24-28.
- [8]阳兴华,刘瑛.12种预测油气田产量模型之间的关系[J].新疆石油地质,2004,25(1):77-79.
- [9]俞启泰.几种重要水驱特征曲线的油水渗流特征[J].石油学报,1999,20(1):56-60.
- [10]俞启泰.水驱油田的驱替特征与递减特征[J].石油勘探与开发,1995,22(1):39-42.
- [11]Rossen W R,van Duijn C J,Nguyen Q P,et al.Injection strategies to overcome gravity segregation in simultaneous gas and water injection into homogeneous reservoirs[R].SPE 99794,2010.
- [12]Rosado-VAjzquez F J,Rangel-German E R.Analysis of capillary,gravity and viscous forces effects in oil/water displacement[R].SPE 108722,2010.
- [13]Jadhawar P S,Sarma H K.Improved production strategy for enhancing the immiscible and miscible CO2-assisted gravity drainage oil recovery[R].SPE 130593,2010.
- [14]Torabi F,Asghari K.Effect of connate water saturation,oil viscosity and matrix permeability on rate of gravity drainage during immiscible and miscible displacement tests in matrix-fracture experimental model[R].SPE 141295,2010.
- [15]Oskouei S,Javad P,Maini B,et al.Effect of initial gas saturation on steam assisted gravity drainage process[R].SPE143452,2011.
- [16]李正民,孙来喜,邓虎城,等.水驱特征曲线的适用条件研究[J].物探化探计算技术,2012,34(2):143-146.
- [17]王涛.底水油藏直井含水上升预测新方法的建立[J].岩性油气藏,2013,25(5):109-112.
- [18]何俊,陈小凡,乐平,等.线性回归方法在油气产量递减分析中的应用[J].岩性油气藏,2009,21(2):103-105.
- [19]胡建国.产量递减的典型曲线分析[J].新疆石油地质,2009,30(6):720-721.
- [20]沈楠,杜军社,王国先,等.应用正态概率模型预测油田含水率变化规律[J].新疆石油地质,2007,28(5):609-611.
- [21]马春生,万宠文,崔秀敏,等.预测水驱油田含水率的一种新方法[J].大庆石油地质与开发,2006,25(3):43-44.
- [22]俞启泰.预测水驱砂岩油藏含水率上升规律的新方法[J].新疆石油地质,2002,23(4):314-316.