吴伟,吴国斌,殷泉东,朱军
WU Wei,WU Guobin,YIN Qudong,ZHU Jun

• 1:中国石化胜利油田分公司东辛采油厂

摘要(Abstract)：

为解决东辛油田部分套窜井、出砂井封堵有效期短(甚至封不住)问题,采用堵—固一体化工艺治理不同区块的6口高含水油井,施工成功率为85.7%,有效率为83.3%。目前,正常生产的5口井恢复产能21.6 m~3/d,累计增油5 664.5 m~3,最长有效期已超过554d且继续有效。堵—固一体化工艺具有货源广、成本低、有效期较长等特点,为同类井的治理提供了可借鉴的经验。
In the light of the problem of the short validity of the plugging(even cannot be sealed) for some casingchanneled wells and sand producers in Dongxin Oilfield,the plugging-cementing technology is adopted and stimulated for six high-water-cut oil wells,the success rate of the operation is up to 85.7%,the effective rate reaches83.3%.Up to now,the productivity of the normally produced 5 wells has recovered to 21.6m~3/d,and the cumulative incremental oil is up to 5 664.5 m,the longest validity reaches more than 554 days,and moreover continue to be effective.The technology is characterized by wider supply of raw materials,lower cost,longer validity and so forth,and furthermore the successful application of the the technology has provided valuable experiences for the stimulation of the similar kind of the wells.

关键词(KeyWords)： 堵—固一体化;工艺;东辛油田
plugging-cementing integration;technology;Dongxin Oilfield

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 吴伟,吴国斌,殷泉东,朱军
WU Wei,WU Guobin,YIN Qudong,ZHU Jun

参考文献(References)：

• [1]杨树栋,李权修,韩修廷.采油工程[M].东营:石油大学出版社,2001.
• [2]刘新华,王建龙,张卫东,等.营8断块油水井套损原因及预防措施[J].中外能源,2012,17(7):57-61.
• [3]陈民,朱大力,张广明.深部取套技术的应用与发展[J].大庆石油地质与开发,2001,20(3):58-59,63.
• [4]何增燕,吴丽华,雷利婧.套损井研究及修复[J].特种油气藏,2004,11(4):70-73.
• [5]杜丙国,师忠卿,朱文兵,等.胜利油田套管损坏综合防治技术[J].石油钻采工艺,2004,26(4):61-66.
• [6]胡明卫,贾建民,吴田忠,等.胡状油田套管损坏防治研究[J].西南石油学院学报,2005,27(2):76-79.
• [7]刘东升,任志刚,杨延滨,等.高含水后期套损井综合治理配套技术[J].大庆石油地质与开发,2006,25(5):61-64.
• [8]王伟,宋桂芳,石勇,等.临南油田油水井套损分析及治理对策[J].大庆石油地质与开发,2009,28(3):93-98.
• [9]曲兆峰,何秀清,张国良.大庆油田油层部位套损井取换套技术研究[J].大庆石油地质与开发,2007,26(5):84-90.
• [10]焦震,谷洪文.套损井密封加固技术新进展[J].大庆石油地质与开发,2009,28(4):80-83.
• [11]吴帮英,吴邦永.大庆油田各类套损井大修新技术[J].大庆石油地质与开发,2011,30(3):139-143.
• [12]赵勇.油水井套管贴堵工艺技术试验[J].油气田地面工程,2011,30(5):32-33.
• [13]王军.无接箍式套管的研究与应用[J].中国化工贸易,2013,4(5):104-104.
• [14]张学军,王正才,周鑫.二次固井技术试验[J].新疆石油科技,1997,7(3):31-35.
• [15]宋明.用φ101.6 mm套管延迟固井技术修复残坏老井[J].石油勘探与开发,2002,29(6):67-68.
• [16]王怀明,刘延文.小套管二次固井工艺技术[J].大庆石油地质与开发,2003,22(5):40-41,48.
• [17]潘峰.小套管二次固井工艺在套损井治理中应用[J].中国科技纵横,2009,7(12):23-23.
• [18]马洪涛.国外膨胀管技术的发展与应用[J].国外油田工程,2006,22(2):20-24.
• [19]吴伟,李小龙,王冰,等.实体膨胀管套管补贴技术在多井段套损井中的应用[J].断块油气田,2007,14(6):67-68.
• [20]卢涌.油田用实体膨胀管悬挂密封的研制[J].世界橡胶工业,2010,37(2):22-23.
• [21]陈炳耀,陈亮,凌辉,等.氢化丁腈橡胶密封胶的制备与性能研究[J].粘接,2013,33(1):42-46.