郭福东,樊灵,巩宏亮,孙春龙
GUO Fudong,FAN Ling,GONG Hongliang,SUN Chunlong

• 1:中国石油大学(华东)石油工程学院
• 2:大庆油田有限责任公司采油工程研究院

摘要(Abstract)：

抽油机变速运行技术能降低电机的峰值功率,改善抽油系统的运行状况。目前在国内外各大油田试验推广,以实现抽油系统的节能降载,提高抽油机的系统效率。为了分析在变速运行过程中造成电机峰值功率降低的主要因素,将整个抽油系统划分为3个子节点,通过现场试验的方式,测取各节点的力学参数变化情况,并引入变异系数的概念,用来描述和对比各项数据的离散程度的大小。在进行数据处理时,结合统计学理论,使用SPSS软件对变化的力学参数作相关性分析,结果表明电机功率的变化与转速变化具有强相关性,电机扭矩的变化与电机的惯性扭矩同样具有强相关性,而减速箱扭矩的变化与曲柄惯性扭矩以及游梁惯性扭矩具有极弱相关性,在分析和对比悬点速度曲线时发现悬点的梯形台式平稳运行有助于降低减速箱扭矩的波动。
For the oil pumping unit,the variable-speed operating technique can decrease the peak power of the motor and improve the operation condition of the pumping system. At present,this technique is widely tested and generalized in the big fields at home and abroad so as to achieve the goals of the energy saving,load reduction and efficiency rising for the system. In order to find out the dominant factor in the motor's peak power decreasing under the variable-speed operating condition,the whole system was divided into three sections. With the help of the field test,the changes of the mechanical parameters in each section were measured,and at the same time,the concept of the variation coefficient was introduced for the characterization and comparison of the discrete degree of each data. In the process of the data processing,integrated with statistical theory and with the help of SPSS Software,the correlation analyses on the changed mechanical parameters were conducted,the results show that there is the strong correlation between the variations of the motor power and rotate speed,so as to the changes of the motor torque and its inertia torque. On the contrary,the torque variation of the gear box shows extremely weak relativity with the inertia torques of the crank and the walking beam. When comparing the velocity curves of the polished rod,it was found that the smooth trapezium-shape bench operation of the rod can help to decrease the torque fluctuation of the gear box.

关键词(KeyWords)： 变速运行;现场试验;变异系数;相关性分析;SPSS
variable speed operation;field test;variation coefficient;correlation analysis;SPSS

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 郭福东,樊灵,巩宏亮,孙春龙
GUO Fudong,FAN Ling,GONG Hongliang,SUN Chunlong

DOI: 10.19597/j.issn.1000-3754.201704006

参考文献(References)：

• [1]苏德胜,刘先刚,吕卫祥,等.游梁式抽油机节能机理综述[J].石油机械,2001,29(5):49-53.
• [2]许士真,白连平,隋娜.关于游梁抽油机合理驱动和电机节能的讨论[J].石油矿场机械,2005,34(2):85-87.
• [3]胡松华,白存安.抽油机柔性拖动控制技术的研究与应用[J].大庆石油地质与开发,2006,25(S1):73-74.
• [4]林萍萍,牛俊邦.游梁式抽油机变频调速控制装置的研制[J].电气传动,2008,38(2):51-53.
• [5]李国栋,张宏俊,陈康博.游梁式抽油机零转矩矢量控制系统研究[J].计算机仿真,2015,32(10):383-388.
• [6]Gibbs S G.Predicting the behavior of sucker-rod pumping systems[R].SPE 116121,1963.
• [7]Palka K,Czyz J.Optimizing downhole fluid production of sucker rod pumps using variable motor speed[R].SPE 113186-MS,2008.
• [8]Doty D R,Schmidt Z.An improved model for sucker rod pumping[R].SPE 10294,1981.
• [9]Lekia S D L,Evans R D.A coupled rod and fluid dynamic model for predicting the behavior of sucker rod pumping systems[R].SPE 21664,1991.
• [10]董世民,马德坤,李学丰.游梁式抽油系统动态参数仿真的综合数学模型[J].石油机械,2001,29(6):46-48.
• [11]董世民,李伟成,赵晓芳,等.变频游梁式抽油系统动态仿真与实时频率优化[J].中国机械工程,2016,27(12):1585-1590.
• [12]董世民,李伟成,侯田博文,等.变频游梁式抽油系统运行参数的优化设计与性能仿真[J].机械工程学报,2016,52(21):63-70.
• [13]冯子明,李琦,丁焕焕,等.游梁式抽油机变速运行节能效果评价[J].石油钻采工艺,2015,37(3):66-70.
• [14]马树宝.游梁式抽油机SURF系统过程优化与柔性运行技术应用[J].中外能源,2015,20(1):89-93.
• [15]王文森.变异系数——个衡量离散程度简单而有用的统计指标[J].中国统计,2007,(6):41-42.
• [16]范立云,许德,费红姿,等.高速电磁阀电磁力全工况关键参数相关性分析[J].农业工程学报,2015,31(6):89-96.
• [17]段玉箫,夏雅琴,白志强,等.地电异常矩形脉冲信号与火山喷发间的相关性分析[J].石油地球物理勘探,2004,39(11):57-61.