利用核磁测井资料确定孔隙类型及组分PORE TYPES AND THEIR COMPOSITIONS DETERMINED BY THE DATA OF NMR LOGGING
杨宁,王贵文,金燕,赖锦,李鉴伦
YANG Ning,WANG Guiwen,JIN Yan,LAI Jin,LI Jianlun
摘要(Abstract)：
孔隙类型的确定及其组分计算对油气田的勘探开发至关重要,传统的铸体薄片、压汞等方法耗时、覆盖率低且成本高。以四川盆地蓬莱地区须家河组须二段为研究层段,采用聚类分析法建立了划分孔隙类型标准、孔隙直径与核磁T2谱的对应关系,然后利用核磁测井确定了孔隙类型并计算出不同孔隙类型的组分含量。结果表明,该方法对认识低孔、低渗储层孔隙微观结构起到了一定作用。
The determination of pore types and the calculation of their components play a very important role in the exploration and development of oil and gas,while the traditional methods such as cast thin-section analyses,mercury injection and so forth are time-consuming,high-cost and low coverage.Taking Xu Member 2 in Xujiahe Formation of Penglai area in Sichuan Basin as an studying example,the corresponding relationship between the standards of pore types,pore diameter and NMR T2 spectrum can be established and divided through the clustering analysis.And then the pore types can be determined and their component contents can be calculated by means of NMR Logging.The contrast results between the calculations and thin-section identification show that the method has played a certain role in making clear of the microstructures of the pores in low-porosity and low-permeability reservoir.
关键词(KeyWords)：
孔隙类型;几何特征;扫描电镜;核磁测井,须二段
pore type;geometrical characteristic;SEM;NMR logging;Xu Member 2
基金项目(Foundation): 国家大型油气田及煤层气开发科技重大专项(2011ZX05020-008)
作者(Author):
杨宁,王贵文,金燕,赖锦,李鉴伦
YANG Ning,WANG Guiwen,JIN Yan,LAI Jin,LI Jianlun
参考文献(References)：
- [1]傅海成,张承森.塔里木盆地轮南奥陶系碳酸盐岩储层类型测井识别方法[J].西安石油大学学报:自然科学版,2006,21(5):38-41.
- [2]张秀荣,赵冬梅.塔河油田碳酸盐岩储层类型测井分析[J].石油物探,2005,44(3):240-245.
- [3]赵克超,陈文学,陶果.利用Kuster-Toksoz方程简化孔隙纵横比谱及判断储层孔隙类型[J].西安石油大学学报:自然科学版,2009,24(1):37-40.
- [4]申艳,谢继容,唐大海.四川盆地中西部上三叠统须家河组成岩相划分及展布[J].天然气勘探与开发,2006,29(3):21-26.
- [5]张响响,邹才能,朱如凯,等.川中地区上三叠统须家河组储层成岩相[J].石油学报,2011,32(2):257-264.
- [6]段新国,宋荣彩,李国辉,等.四川盆地须二段综合成岩相特征研究[J].西南石油大学学报:自然科学版,2011,33(1):7-14.
- [7]王平平.油层物理实验技术[M].北京:石油工业出版,1995.
- [8]刘卫,肖忠祥,杨思玉,等.利用核磁共振(NMR)测井资料评价储层孔隙结构方法的对比研究[J].石油地球物理勘探,2009,44(6):773-778.
- [9]肖亮.利用核磁共振测井资料评价储集层孔隙结构的讨论[J].新疆石油地质,2008,29(2):260-263.
- [10]肖忠祥,张冲,肖亮.利用孔、渗参数构造毛细管压力曲线[J].新疆石油地质,2008,29(5):635-637.
- [11]刘晓鹏,肖亮,张伟.储层毛管压力曲线构造方法及其应用[J].西南石油大学学报:自然科学版,2008,30(6):126-130.
- [12]刘堂宴,王绍民,傅容珊,等.核磁共振谱的岩石孔喉结构分析[J].石油地球物理勘探,2003,38(3):328--333.
- [13]Yakov V.A practical approach to obtain primary drainage capillary pressure curves from NMR core and log data[J].Petrophysics,2001,42(4):334-343.
- [14]运华云,赵文杰,刘兵开,等.利用T2谱分布进行岩石孔隙结构研究[J].测井技术,2002,26(1):18-21.
- [15]潘和平,马火林,蔡柏林,等.地球物理测井与井中物探[M].北京:科学出版社,2008.