刘敏,孙刚,刘红颖
LIU Min,et al.(Exploration and Development Research Institute of Daqing Oilfield Company Ltd.,Daqing 163712

• 1:大庆油田有限责任公司勘探开发研究院
• 2:大庆油田有限责任公司勘探开发研究院
• 3:大庆油田有限责任公司勘探开发研究院 黑龙江大庆163712
• 4:黑龙江大庆163712

摘要(Abstract)：

相对分子质量为2 500×104以上的超高分子聚合物在大庆油田主力油层污水配制聚合物现场应用过程中,已经取得了明显的增油、降水效果,干粉年用量达到了2×104t以上。对超高分子聚合物理化性能的准确评价有利于对不同聚合物进一步优选并指导其注入参数的优化。生产应用表明,在室内检测过程中,按照中分子聚合物过滤因子的测定方法来评价超高分子聚合物过滤因子表现出了一定局限性。通过对原有方法的调整和改进,使检测结果能够体现不同超高分子聚合物的过滤因子差异,更易于对该类型产品进行质量监控。依据改进的检测方法编制的超高分子聚合物过滤因子检测标准已在油田各测试机构广泛使用。
During the field application in Daqing major reservoir,high molecular weight polymer of over 2500×10~4 made up with sewage,has acquired apparent effect of oil production increase and water production decline with annual amount of dry chemical reaching 2×10~4 tons.Accurate evaluation on physicochemical property of high molecular weigh polymer is favorable for further optimization of different polymers and for guidance of injection parameters.In the process of laboratory testing,evaluation of filtering factor of ultra high molecular weight polymer has certain limitation according to test of filtering factor of molecular weight polymer.This paper has adjusted and improved initial test method,so new test result can display the difference of filtering factor for various ultra high molecular weight polymers,which is much easier to perform quality monitoring for this type of products.Test criteria formulated for filtering factor of ultra high molecular weight polymer has been widely applied in testing departments of oilfield.

关键词(KeyWords)： 超高分子聚合物;过滤因子;流出时间;流出体积
ultra high molecular weight polymer;filtering factor;time of outflow;volume of outflow

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 刘敏,孙刚,刘红颖
LIU Min,et al.(Exploration and Development Research Institute of Daqing Oilfield Company Ltd.,Daqing 163712

参考文献(References)：

• [1]牛金刚,孙刚.油田产出污水配制聚合物实验研究[J].大庆石油地质和开发,2001,20(2):17-19.
• [2]王宝江,李彦兴.清水配制污水稀释聚合物溶液试验研究[J].大庆石油地质和开发,2001,20(2):86-88.
• [3]王刚,孙刚.超高分子量聚合物性能评价方法研究[J].大庆石油地质和开发,2001,20(2):101-103.
• [4]孙刚,刘红颖.聚合物产品质量监督检验方法及应用[J].石油工业技术监督,2002,18(11):34-38.
• [5]赵晓京,卢祥国.聚合物溶液过滤因子自动检测仪的研制[J].大庆石油学院学报,2005,29(2):45-47.
• [6]廖广志,孙刚.驱油用部分水解聚丙烯酰胺微观性能评价方法[J].北京大学学报,2003,39(6):815-820.
• [7]Gang Sun.E ffect of Salts on the Hydrolyzed Polyacrylam ide Conforma-tional Properties[J].Polym er Preprints(D ivision of Polym er Chem-istry,Inc.Am erican Chem ical Society),2003,44(2):909-910.