刘洪兵,周正祥,廖广志
LIU Hong bing; ZHOU Zheng xiang; LIAO Guang zhi(Exploration and Development Research Institute of Daqing Oilfield Company Ltd.;

• 1:大庆油田有限责任公司勘探开发研究院
• 2:大庆油田有限责任公司勘探开发研究院
• 3:大庆油田有限责任公司勘探开发研究院 黑龙江大庆163712
• 4:黑龙江大庆163712

摘要(Abstract)：

聚合物相对分子质量大小是影响聚合物驱油效果的一个重要因素 ,聚合物相对分子质量越高 ,增粘效果越好 ,最终采收率也越高。采用高相对分子质量聚合物驱油时 ,油水粘度比很小 ,采出液中含水率上升速度将大大减缓 ,当它达到采油经济允许的极限含水率时 ,油层中的含水饱和度已经很高 ,因而获得的驱油效率高。运用室内实验、矿场试验和数值模拟方法研究了残余阻力系数变化对聚合物驱油效果的影响以及高相对分子质量聚合物对聚合物驱最终采收率和含水变化的影响 ,为油田应用高相对分子质量聚合物提供了理论和实践依据
The molecular weight of polymer is of great importance in polymer flooding. In recent years , high molecular weight polymer has been used increasingly in oilfield. The more higher molecular weight of polymer is used, the more higher viscosity is obtained. The resistance factor and residual resistance factor are increased, so enhanced oil recovery is achieved. The ratio of oil water viscosity is small and the raise speed of water cut is decreased with the usage of high molecular weight polymer. The effects of residual resistance factor for polymer flooding are discussed here using numerical simulation method, as well as the effects of high molecular weight polymer to ultimate recovery and water cut. The effects of high molecular weight polymer to oil recovery efficiency are studied by combining with laboratory and fieldwork experiments. The research work provides theoretical and practice evidences for application of high molecular weight polymer in oilfields.

关键词(KeyWords)： 高相对分子质量聚合物;残余阻力系数;含水;采收率;驱油效果
high molecular weight polymer;residual resistance factor;water cut;oil recovery;displacment effects

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 刘洪兵,周正祥,廖广志
LIU Hong bing; ZHOU Zheng xiang; LIAO Guang zhi(Exploration and Development Research Institute of Daqing Oilfield Company Ltd.;

参考文献(References)：

• [1]陈铁龙三次采油理论[M ]北京:石油工业出版社,2000
• [2]王志武三次采油技术及矿场应用[M ]上海:上海交通大学出版社,1995
• [3]卢祥国,牛金刚化学驱油理论与实践[M ]哈尔滨:哈尔滨工业大学出版社,2000
• [4]姜言里聚合物驱油最佳技术条件优选[M ]北京:石油工业出版社,1994