何聪鸽,许安著,范子菲,曾保全,冀中原
HE Congge,XU Anzhu,FAN Zifei,ZENG Baoquan,JI Zhongyuan

• 1:中国石油勘探开发研究院
• 2:中国石油天然气勘探开发公司

摘要(Abstract)：

过热蒸汽注入油层后,经历了从过热蒸汽到湿蒸汽再到热水的相态变化过程,在加热区内形成过热区、蒸汽区和热水区,因此以注普通湿蒸汽为基础的传统加热半径计算模型对其不再适用。为了准确计算注过热蒸汽的加热半径,结合注过热蒸汽过程中油层温度分布的实际情况,根据瞬时热平衡原理,构建了一个新的稠油油藏注过热蒸汽加热半径计算模型。结果表明:新模型计算结果与CMG STARS数值模拟计算结果吻合较好,最大相对误差为7.4%,新模型具有正确性;虽然提高井底蒸汽过热度对扩大加热区范围并无明显作用,但其能有效增大井筒附近过热区半径。
After injecting the superheated steam into the oil reservoir,the following phase change process occurs:from superheated steam transforming into wet steam and hot water,and the superheated zone,steam zone and hot water zone are generated in the heated area. Therefore,the traditional heated-radius calculating models on the basis of the common wet steam injection are not applicable any more. In order to accurately calculate the heated radius during the superheated steam injection,combining with the actual formed temperature distribution of the oil layers in the process of the superheated steam injection,and moreover with the help of the instantaneous energy conservation principle,a new heated radius calculating model was established for the superheated steam injection of the heavy oil reservoir. The results show that there is much better coincidence for the calculated results between the new model and CMG STARS numerical simulation,the maximum relative error is 7. 4%,thus the correctness of this model is verified; although the increase of the steam superheat degree at the bottom of the well has no significant impact on enlarging the heated block,it can effectively expand the radius of superheated zone nearby the borehole.

关键词(KeyWords)： 稠油;过热蒸汽;过热度;加热半径;非等温模型
heavy oil;superheated steam;superheat degree;heated radius;non-isothermal model

Abstract:

Keywords:

基金项目(Foundation): 中国石油集团公司重大科技专项“中国石油海外油气上产2×108t开发关键技术研究”(2011E-2504)

作者(Author): 何聪鸽,许安著,范子菲,曾保全,冀中原
HE Congge,XU Anzhu,FAN Zifei,ZENG Baoquan,JI Zhongyuan

参考文献(References)：

• [1]李春涛,钱根宝,吴淑红,等.过热蒸汽性质及其在稠油油藏吞吐开发中的应用:以哈萨克斯坦肯基亚克油田盐上稠油油藏为例[J].新疆石油地质,2008,29(4):495-497.
• [2]许安著,吴向红,范子菲,等.注过热蒸气井筒物性参数计算综合数学模型[J].大庆石油学院学报,2009,33(1):29-35.
• [3]盖平原.注过热蒸汽井热力计算[J].中国石油大学学报(自然科学版),2011,35(2):147-151.
• [4]周体尧,程林松,李春兰,等.过热蒸汽与稠油之间的水热裂解实验[J].西南石油大学学报(自然科学版),2009,31(6):89-92.
• [5]XU Anzhu,MU Longxin,FAN Zifei,et al.Mechanism of heavy oil recovery by cyclic superheated steam stimulation[J].Journal of Petroleum Science and Engineering,2013,111(12):197-207.
• [6]许安著,吴向红,范子菲,等.肯基亚克盐上稠油油藏优选注过热蒸汽开发方式研究[J].科技导报,2009,27(6):29-33.
• [7]关群丽.浅薄层特稠油过热蒸汽驱开发研究与试验:以楼资27井区为例[J].石油地质与工程,2011,25(2):76-78.
• [8]李星,黄郑,费永涛,等.过热蒸汽吞吐开采界限及注采参数优化研究[J].石油天然气学报,2012,34(6):148-151.
• [9]MARX J W,LANGENHEIM R H.Reservoir heating by hot fluid injection petroleum transactions[J].AIME,1959,216(1):312-315.
• [10]WILLMAN B T,VALLEROY V V,RUNBERG G W,et al.Laboratory studies of oil recovery by steam injection[J].JPT,1961,13(7):681-696.
• [11]何聪鸽,穆龙新,许安著,等.稠油油藏蒸汽吞吐加热半径及产能预测新模型[J].石油学报,2015,36(12):1564-1570.
• [12]吴向红,许安著,范海亮.稠油油藏过热蒸汽吞吐开采效果综合评价[J].石油勘探与开发,2010,37(5):608-613.
• [13]周体尧,程林松,何春百,等.注过热蒸汽井筒沿程参数及加热半径计算模型[J].石油勘探与开发,2010,37(1):83-88.
• [14]沈维道,蒋智敏,童钧耕.工程热力学[M].北京:高等教育出版社,2001:198-200.
• [15]刘文章.稠油注蒸汽热采工程[M].北京:石油工业出版社,1997:64-133.
• [16]刘慧卿,范玉平,赵东伟,等.热力采油技术原理与方法[M].东营:石油大学出版社,2008:18-33.
• [17]钟立国,马帅,鲁渊,等.稠油与CO2、CH4或N2体系高温高压界面张力测定分析[J].大庆石油地质与开发,2015,34(1):140-145.
• [18]张贤松,谢晓庆,李延杰,等.渤海油区稠油油藏蒸汽吞吐注采参数优化模型[J].油气地质与采收率,2016,23(5):88-92.
• [19]王璐,何艳青,张华珍.太阳能稠油热采技术研究与进展[J].石油科技论坛,2015,34(4):68-71.
• [20]曹立迎,刘传喜,孙建芳,等.低渗透碳酸盐岩稠油油藏热复合化学方法提高采收率实验[J].油气地质与采收率,2016,23(3):101-105.
• [21]姜维东,卢祥国,刘进祥,等.疏水缔合聚合物溶液与稠油油藏相互作用实验[J].大庆石油地质与开发,2015,34(3):108-113.
• [22]刘义坤,刘扬,王凤娇,等.江37区块浅薄层稠油油藏蒸汽吞吐参数优化[J].特种油气藏,2015,22(6):90-92.