江怀友,沈平平,裘怿楠,李治平,刘俊姝,吕威
JIANG Huai-you1,SHEN Ping-ping2,QIU Yi-nan2,LI Zhi-ping3,LIU Jun-shu4,LU Wei1(1.Economic Technology Research Institute of PetroChina

• 1:中国石油经济技术研究院
• 2:中国石油勘探开发研究院
• 3:中国石油勘探开发研究院
• 4:中国地质大学

摘要(Abstract)：

MRC技术被国际石油专家们确立为21世纪初最具发展潜力的8项钻井新技术之一,代表了21世纪石油技术的发展方向。MRC除具有水平井的常规优势外,其成本比单个水平井低,它是从一个主井眼中钻成2个或多个分支井眼,从而钻遇多个不同空间位置的产层,增大储层钻穿几率和有效面积,进而提高单井油气产量。它已成为油气田开发的一种重要技术,在世界范围内广泛应用。结合世界油田开发问题,提出应用MRC技术挖潜剩余油发展方向,必将为全球老油田的高水平、高效益开发和可持续发展提供理论及实践依据。
MRC technology is determined as one of the 8 most potential new drilling technology in 21st century by international petroleum experts.It represents the development direction of petroleum technology in 21st century.MRC has the conventional advantages of horizontal well,and has lower cost than single horizontal well.It drills two or several multi-lateral wells so as to encounter several pay zones with different spatial positions,increase penetration percentage and effective area of reservoirs and finally increase single well oil and gas production.It has become an important technology applied in the whole world.Combining with world oilfields development,this paper indicates that using MRC to produce remaining oil will provide theoretical and practical evidence for high standard and high beneficial development and sustainable development of old fields in the whole world.

关键词(KeyWords)： MRC技术;多分支井;油田开发
MRC technology;multi-lateral well;oilfield development

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 江怀友,沈平平,裘怿楠,李治平,刘俊姝,吕威
JIANG Huai-you1,SHEN Ping-ping2,QIU Yi-nan2,LI Zhi-ping3,LIU Jun-shu4,LU Wei1(1.Economic Technology Research Institute of PetroChina

参考文献(References)：

• [1]Saleri N G,Salamy S P.SHAYBAH-220:A Maximum Reservoir Con-tact(MRC)Well and Its Implications for Developing Tight Facies Res-ervoirs[R].SPE 81487.
• [2]Dossary AS.Challenges and Achievements of Drilling Maximum Reser-voir Contact(MRC)Wells in Shaybah Field[R].SPE 85307.
• [3]Nughaimish F N.First Lateral-Flow-Controlled Maximum ReservoirContact(MRC)well in Saudi Arabia:Drilling&Completion:Chal-lenges&Achievements:Case Study[R].SPE 87959.
• [4]Afaleg N I.Design and Deployment of Maximum Reservior ContactWells With Smart Completions in the Development of a Carbonate Res-ervoir[R].SPE 93138.
• [5]AL-Dossary A S.First Installation of Hydraulic Flow Control System inSaudi A Rranco[R].SPE 93183.
• [6]Ginest N H.First Deep Multi-Lateral Gas Wells:Objectives,WhatWe Got,Lessons Learned and Next Steps[R].SPE 93530.
• [7]Siddiqui S.Techniques for Extracting Reliable Density and Porosity Da-ta From Cuttings[R].SPE 96918.
• [8]Kanj MY.Taming Complexities of Coupled-Geomechanics in Rock Tes-ting:From Assessing Reservior Compaction to Analyzing Stability ofExpandable Sand Screens and Solid Tubulars[R].SPE 97022.
• [9]AL-Otaibi MB.Wellbore Cleanup by Water Jetting and Enzyme Treat-ments in MRC Wells:Case Histories[R].SPE 97427.
• [10]AL-Jeffre AM.World's First MRC WindowExits Out of Solid Expand-able Open-hole Liner in the Shaybah Field,Saudi Arabia[R].SPE97427.
• [11]Perez-Tellez,Carlos.Improved Bottomhole Pressure Control for Un-derbalanced Drilling Operations[D].Ph.D.Dissertation.LouisianaState University and Agricultural&Mechanical College,2003.
• [12]Hottman W E.Multilateral and Multibranch Wells for Mature Reser-voirs[R].SPE 37057.
• [13]Themig D.Planning and Evaluation Are Crucialto Multilateral Wells[J].Petroleum Engineer International,1996.
• [14]Smith R C.The Lateral Tie-back System:The Ability to DriHandCase Multiple Laterals[R].SPE 27436.
• [15]Baryshnikov A,Calderoni A,Ligrone A,et al.A New Approach tothe Analysis of Drill string Fatigue Behavior[R].SPE 30524.
• [16]Dale B A.An Experimental Investigation of Fatigue Crack Growth inDrill string Tubulars[R].SPE 15559.
• [17]Howard J A,Halbert M E,Arthur Lubinski.Systematic Tracking ofFatigue and Crack Growth to Optimize Drill string Reliability[R].SPE 25775.
• [18]王乃举.中国油藏开发模式[M].北京:石油工业出版社,1999.