杨付林,范勐
YANG Fulin,FAN Meng

• 1:钦州学院石油与化工学院

摘要(Abstract)：

为了提高普通稠油采收率及解决碱驱结垢问题,利用江苏油田P14区块和W8区块不同酸值的普通稠油油样,进行界面张力、乳化性能、阻垢剂优化和驱油等研究,构建了一种适用于普通稠油的耐垢复合碱驱体系。结果表明:在质量分数为1. 5%时,碳酸钠(Na_2CO_3)与W8原油界面张力较低,可降至0. 03 m N/m,形成较稳定的水包油乳状液;优化的阻垢剂配方为0. 025%羧酸盐阻垢剂+0. 025%膦酸盐阻垢剂;酸值较高的P14原油碱驱采收率比酸值较低的W8原油的采收率高28%。研究成果为普通稠油油藏有效开采提供了新思路和技术手段。
In order to enhance the heavy oil recovery and solve the scaling problem in the alkaline flooding,using the common heavy oil samples with different acid values taken from Block P14 and W8 of Jiangsu Oilfield,the interfacial tension( IFT),emulsifying performance,optimization of the scale inhibitor,oil flooding and so on were engaged,So it was proposed a new type scale-resistant complex alkaline flooding system for the common heavy oil was established. The results show that when Na_2CO_3 mass fractor is 1. 5%,the IFT between Na2 CO3 and the oil from Block W8 is pretty lower and can reduce to 0. 03 m N/m,and the formed oil-in-water emulsion is much more stable; the optimized formula of the scale inhibitor is 0. 025% carboxylate scale inhibitor + 0. 025% phosphonate scale inhibitor; the alkaline-flooded oil recovery in Block P14 with higher acid value is 28% higher than that in Block W8 with lower acid value. The study achievements have provided the new thinking and technical method for the high-efficiency production of the common heavy oil reservoir.

关键词(KeyWords)： 稠油;碱筛选;耐垢性;乳化性;物理模拟;机理分析
heavy oil;alkaline screening;scale resistance/resistant;emulsibility/emulsifiability;physical molding;mechanism analysis

Abstract:

Keywords:

基金项目(Foundation): 广西高校北部湾石油天然气资源有效利用重点实验室基金“海上稠油油田乳化降黏集输技术的研究”(2017KLOG17)

作者(Author): 杨付林,范勐
YANG Fulin,FAN Meng

DOI: 10.19597/J.ISSN.1000-3754.201806034

参考文献(References)：

• [1]谢文彦,李晓光,陈振岩,等.辽河油区稠油及高凝油勘探开发技术综述[J].石油学报,2007,28(4):145-150.
• [2]辛寅昌,董晓燕,卞介萍,等.高矿化度稠油流动的影响因素及改善原油流动的方法[J].石油学报,2010,31(3):480-485.
• [3]陈挺,杨正明,王学武,等.致密油藏活性水采油机理[J].大庆石油地质与开发,2017,36(5):169-174.
• [4]陈涛平,赵斌,贺如.特低渗透油藏CO2与N2驱替方式[J].大庆石油地质与开发,2018,37(4):127-132.
• [5]王传飞,吴光焕,韦涛,等.薄层特超稠油油藏氮气与降黏剂联合蒸汽辅助重力泄油物理模拟实验[J].油气地质与采收率,2017,24(1):80-85.
• [6] Mai A,Bryan J,Goodarzi N. Insights into non-thermal recovery of heavy oil[J]. Journal of Canadian Petroleum Technology,2009,48(3):27-35.
• [7] Mai A,Kantzas A. Heavy oil waterflooding:effects of flow rate and oil viscosity[J]. Journal of Canadian Petroleum Technology,2009,48(3):42-51.
• [8] Rahul Saha,Ramgopal V S,Uppaluri,et al. Influence of emulsification,interfacial tension,wettability alteration and saponification on residual oil recovery by alkali flooding[J]. Journal of Industrial and Engineering Chemistry,2018,59(1):286-296.
• [9] Liu Q,Dong M,Ma S. Alkaline/surfactant flood potential in western Canadian heavy oil reservoirs[R]. SPE 99791,2006.
• [10] Liu Q,Dong M,Ma S. Surfactant enhanced alkaline flooding for western Canadian heavy oil reservoirs[J]. Colloids Surf A,2007,293(1):63-71.
• [11] Dong M,Ma S,Liu Q. Enhanced heavy oil recovery through interfacial instability:a study of chemical flooding for Brintnell heavy oil[J]. Fuel,2009,88(6):1049-1056.
• [12]裴海华,张贵才,葛际江,等.稠油碱驱中液滴流提高采收率机理[J].石油学报,2012,33(4):663-669.
• [13]裴海华,张贵才,葛际江,等.稠油碱驱机理的物理模拟和数值模拟[J].石油学报,2011,32(2):285-289.
• [14]王海桐,魏安军,方文杰.浅谈碱驱过程中的结垢机理及解决途径[J].地下水,2013,35(3):216-217.
• [15]马超,赵林,占程程,等.碱驱过程中硅酸盐垢的形成机理,影响因素及解决途径[J].西部探矿工程,2006,18(3):95-96.