李颖,郝紫嫣
LI Ying,HAO Ziyan

• 1:大庆油田有限责任公司勘探开发研究院
• 2:美国南加州大学Viterbi工程学院

摘要(Abstract)：

大庆油田升155区块属中低渗透油藏,进入高含水期后,由于地层非均质性比较严重,影响了水驱开发效果。为了进一步提高采收率,开展了深度调剖技术研究及现场试验。针对该区块的油藏特点、地层温度和水质情况,设计了树脂型深度调剖剂的3个配方体系,通过评价3个配方体系的初始黏度、初凝时间、终凝时间、成胶黏度、黏度保留率、突破压力、岩心实验封堵率等性能指标,筛选出综合性能最佳的调剖剂配方1体系。该调剖剂配方体系在大庆油田升155试验区应用后,调剖井平均单井注入压力上升2.6 MPa,注入剖面得到改善,含水率下降了7.4百分点,平均单井日增油量0.9 t。
Block Sheng-155 in Daqing Oilfield belongs to low-medium-permeability reservoirs. At later stage of high water cut,because of the rather serious formation heterogeneity,the water-flooded development effects are influenced. In order to further enhancing the oil recoveries,the researches and field test on the deep-profile-controlling technique are carried out. In the light of the reservoir characteristics,formation temperature and water quality of the block,three-formulation systems are designed for the resin-type depth-profile-control agent. By evaluating the initial viscosity,initial setting time,initial setting viscosity,final setting time,viscosity,gelling viscosity and its retention rate,breakthrough pressure,core plugged rate and other performance indexes for the system,Formula-1system of the agent with the best comprehensive performances is selected. After applied in the pilot in Block Sheng-155 of Daqing Oilfield for the formula system of the profile-controlling agent,the average injection pressure rises by2. 6 MPa for the single well,the injected profiles are improved,the water cut decreases by 7. 4%,and the average incremental oil is up to 0. 9 t per day for the individual well.

关键词(KeyWords)： 树脂型;深部调剖剂;初凝时间;性能评价
resin-type;depth-profile-controlling agent;initial setting time;performance evaluation

Abstract:

Keywords:

基金项目(Foundation): 国家科技重大专项“大庆长垣特高含水油田提高采收率示范工程”(2011ZX5052)和“聚合物后进一步提高采收率新技术”(2011ZX05010-005)

作者(Author): 李颖,郝紫嫣
LI Ying,HAO Ziyan

参考文献(References)：

• [1]孟静.二、三类油层新型调剖剂研制[J].大庆石油地质与开发,2015,34(1):132-136.
• [2]赖小娟,宫米娜,马国艳,等.酚醛树脂交联聚丙烯酰胺弱凝胶的制备与性能评价[J].陕西科技大学学报,2014,32(3):75-78.
• [3]王海涛.Cr3+聚合物凝胶调驱效果及作用机理[J].大庆石油地质与开发,2014,33(4):115-120.
• [4]王业飞,曲萍萍,刘巍,等.耐温耐盐无机调剖剂的室内研究[J].大庆石油地质与开发,2007,26(5):117-120.
• [5]张焘,苏龙,刘建东,等.凝胶深部调剖技术研究与发展趋势[J].油气田地面工程,2009,28(1):26-27.
• [6]张同友,赵劲毅,胡勇,等.聚合物凝胶体系性能评价方法研究[J].大庆石油地质与开发,2005,24(2):86-91.
• [7]赖南君,叶仲斌,覃孝平,等.钠土—聚合物复合调剖体系性能评价[J].油气田地面工程,2010,29(5):11-12.
• [8]赖南君,闻一平,傅波,等.复合交联聚合物弱凝胶体系的研制与性能评价[J].石油钻采工艺,2014,36(3):87-91.
• [9]吕广普,郭焱,蒲春生,等.低渗透油藏用深部调剖剂[J].油气田地面工程,2010,29(6):13-14.
• [10]于海洋,刘向军,徐彬彬,等.渗透率和注入速度对多孔介质中酚醛树脂冻胶动态成胶的影响[J].油气地质与采收率,2014,21(3):73-77.