周俊杰
ZHOU Junjie

• 1:中国石油集团长城钻探工程有限公司

摘要(Abstract)：

储层孔隙结构对水驱油特征有重大影响。以延长油田坪北区长8储层为例,综合利用岩心、铸体薄片、扫描电镜、压汞实验等资料对储层孔隙结构进行分析,通过真实砂岩微观模型实验,探讨了不同孔隙结构对水驱油效率的影响。研究表明:长8储层主要岩性为细粒长石砂岩和细粒岩屑长石砂岩,主要孔隙类型为残余粒间孔隙(原生孔隙)、溶蚀粒间和粒内孔隙(次生孔隙);储层类型可分为Ⅰ类、Ⅱ类、Ⅲ类和Ⅳ类,Ⅰ、Ⅱ类为主要储层;水驱油驱替类型以均匀驱替、网状均匀驱替、指状网状驱替以及指状驱替为主,储层物性、孔喉特征对驱油效率有重要影响,Ⅰ、Ⅱ类储层驱油效率高达50%。明确孔隙结构与驱油效率关系可更好地指导油气合理开发。
The structures of the pore and throat possess important influences on the characteristics of the waterflooded oil,taking Chang 8 reservoir in Pingbei Block of Yanchang Oilfield as example,comprehensively integrated with the core,cast thin sheet,scanning electron microscope mercury injection experimental data and so on,the structures were figured out,and moreover through the micro-model experiment of real sandstones,the influences of different pore structures on the waterflooded oil efficiency were explored. The study shows that Chang 8 reservoir is mainly composed of the fine-grained feldspar sandstone and fine-grained lithic feldspar sandstone,the principal pore type,are shown as follows: residual intergranular pore( primary pore),dissolved intergranular and intragranular pore( the secondary pore); the reservoir types can be classified into Class Ⅰ,Ⅱ,Ⅲ and Ⅳ,ClassⅠand Ⅱare the main reservoirs; the waterflooded oil kinds are generally divided into uniform displacement,reticular uni-form displacement,finger reticular displacement and finger displacement,the reservoir physical properties and pore-throat characteristics have important influences on the oil displaced efficiency,the flooded efficiencies of ClassⅠ& Ⅱ reservoirs are up to 50%. Therefore making clear of the relationships between the structures and efficiencies can better guide the rational development of the oil and gas.

关键词(KeyWords)： 孔隙结构;驱油效率;储层物性;孔喉;坪北区;长8
pore structure;oil displaced efficiency;reservoir physical property;pore and throat;Pingbei Block;Chang 8

Abstract:

Keywords:

基金项目(Foundation): 国家科技重大专项“鄂尔多斯盆地大型低渗透岩性地层油气藏开发示范工程”(2011ZX05044)

作者(Author): 周俊杰
ZHOU Junjie

DOI: 10.19597/J.ISSN.1000-3754.201706005

参考文献(References)：

• [1]李辉,易远元,刘玮,等.阿尔凹陷储层微观孔隙结构对水驱油效果影响研究[J].长江大学学报(自然科学版),2013,10(16):44-47.
• [2]朱玉双,曲志浩,孔令荣,等.安塞油田坪桥区、王窑区长6油层储层特征及驱油效率分析[J].沉积学报,2000,18(2):279-283.
• [3]陈强,孙卫,张相春,等.低渗透储层微观渗流特征及影响因素分析:以鄂尔多斯盆地华庆油田长6储层为例[J].石油化工应用,2016,35(1):51-55,79.
• [4]全洪慧,朱玉双,张洪军,等.储层孔隙结构与水驱油微观渗流特征:以安塞油田王窑区长6油层组为例[J].石油天然气地质,2011,32(6):952-959.
• [5]张茜,任大忠,任强燕,等.鄂尔多斯盆地姬源油田长6储层微观孔隙结构特征及其对水驱油特征的影响[J].西北大学学报(自然科学版),2015,45(2):283-290.
• [6]刘桂玲,孙军昌,熊生春,等.高邮凹陷南断阶特低渗透油藏储层微观孔隙结构特征及分类评价[J].油气地质与采收率,2013,20(4):37-41.
• [7]高辉,孙卫,路勇,等.特低渗透砂岩储层油水微观渗流通道与驱替特征实验研究:以鄂尔多斯盆地延长组为例[J].油气地质与采收率,2011,18(1):58-62.
• [8]张金良,郭爱华,李浩,等.坪北探区延长组长8、长9油层组资源潜力分析[J].陕西科技大学学报,2012,30(1):101-105.
• [9]师清高,龚建涛,秦志成,等.延长油田三叠系长8、长6油层组沉积特征及储集性能[J].大庆石油地质与开发,2015,34(1):36-41.
• [10]张振红,朱静,余芳,等.三角洲前缘厚层砂岩孔隙结构及微观渗流特征:以吴仓堡地区长6储层为例[J].地质通报,2016,35(2-3):440-447.
• [11]魏钦廉,郑荣才,肖玲,等.鄂尔多斯盆地吴旗地区长6储层特征及影响因素分析[J].岩性油气藏,2007,9(4):40-50.
• [12]王璐,杨胜来,孟展,等.高凝油油藏水驱油效率影响因素[J].大庆石油地质与开发,2016,35(5):69-73.
• [13]尹淑敏.分流河道砂体注水开发过程储层参数变化特征[J].大庆石油地质与开发,2015,34(4):69-72.
• [14]李芳玉,程时清,雷启鸿,等.特低渗透油藏水平井开发效果评价指标和分类评价方法[J].大庆石油地质与开发,2017,36(1):55-60.
• [15]黄龙,田景春,肖玲,等.鄂尔多斯盆地富县地区长6砂岩储层特征及评价[J].岩性油气藏,2008,20(1):83-85.
• [16]赵小强,万友利,易超,等.鄂尔多斯盆地姬塬油田长8段沉积相研究[J].岩性油气藏,2011,23(4):94-99.
• [17]蔡玥,赵乐,肖淑萍,等.基于恒速压汞的特低-超低渗透储层孔隙结构特征:以鄂尔多斯盆地富县探区长3油层组为例[J].油气地质与采收率,2013,20(1):32-35.
• [18]殷代印,吕腾,陈鑫矿.长垣外围特低渗储层孔隙结构参数及驱油效率研究[J].岩性油气藏,2016,29(3):33-37.
• [19]宫宝,李松源,田晓东,等.评价水驱油田开发效果的系统工程方法[J].大庆石油地质与开发,2015,34(5):58-63.
• [20]管错,李宜强,石成方,等.对特高含水期水驱特征曲线上翘问题的新认识[J].大庆石油地质与开发,2017,36(2):64-68.
• [21]何巧林,关增武,左小军,等.轮南2油田JIV油藏水驱实验及微观剩余油分布特征[J].新疆石油地质,2017,38(1):81-84.
• [22]林景晔,夏丹.注水开发油田剩余油分布及提高采收率的水动力学方法[J].大庆石油地质与开发,2013,32(1):76-81.