刘继莹,张居和
LIU Jiying,ZHANG Juhe

• 1:大庆油田有限责任公司勘探开发研究院

摘要(Abstract)：

聚合物驱油层岩石中残留聚合物分布特征是聚合物驱精细调整、提高驱油效果的基础。在大庆萨尔图油田聚合物驱不同注采位置检查井采集油砂样品,利用高温氧化还原—热导—元素法测定聚合物驱岩石中聚合物残留量,对不同注采位置岩石残留聚合物分布特征和影响因素进行研究。结果表明:聚合物驱油层岩石中聚合物残留量在纵向上非均质性分布明显,残留量最大相差近80倍,随聚合物驱时间的增长残留量趋于增大、非均质性趋于减小;在横向及平面上聚合物残留量由大到小的顺序为主流线注入井位置、主流线中间位置、主流线采油井位置、分流线中间位置;聚合物驱主流线从注入井到采油井方向,聚合物残留量与渗透率从高度负相关变化为显著负相关,相关程度呈减小趋势,与孔隙度从微弱正相关变化为显著负相关,相关程度呈增大趋势;聚合物驱分流线中间位置聚合物残留量与渗透率显著负相关、与孔隙度高度正相关;残留聚合物分布受油层岩性及粒度、注采位置、聚合物驱时间、油层物性等影响。
The distribution characteristics of the polymer residue in the polymer flooded rocks of the oil reservoirs is the bases of the fine adjustment and flooded effects enhancement of the polymer displacement. For the oil sand samples from the inspectors in different flooded injection and production sites in Daqing Saertu Oilfield,with the help of high-temperature redox-thermal conductivity-element method,the residual amount is determined and tested,and moreover the distribution characteristics and influencing factors are researched for the polymer residue in different injection and production places. The achievements show that there is obvious vertical distribution in the heterogeneity for the residues,the maximal differential can almost reach eighty times,with the rise of the flooded time,so does the residue,while the heterogeneity is on the contrary; in horizon and plane,the order of the amount from top to bottom is in the injectors along the main streamlines,between these main streamlines,the producers along the main streamlines and between the above streamlines; in the direction of the polymer flooded main streamlines fromthe injectors to the producers,the closer negative correlation with the residues and the permeabilities tends to obvious negative correlation and moreover the degree is decreased,while the weaker positive correlation with the porosities is changed into the obvious one and furthermore the correlated degree is rising; in the middle sites of diversion line of the polymer flooding,the polymer residues are obviously negatively related with the permeabilities and significantly positively correlated with the porosities; the distribution of the polymer residue is influenced by the reservoir lithologies,granularity,injection-production site,flooding duration time,physical properties of the oil reservoirs etc.

关键词(KeyWords)： 高温氧化还原—热导—元素法;注采位置;岩石;聚合物残留量;非均质性;影响因素
high-temperature redox-thermal conductivity-element method;injection-production site/location;rock;polymer residue;heterogeneity;influencing factor

Abstract:

Keywords:

基金项目(Foundation): 中国石油天然气股份公司科技专项“大庆探区非常规油气勘探开发关键技术研究与现场试验”(2012E-2603)

作者(Author): 刘继莹,张居和
LIU Jiying,ZHANG Juhe

参考文献(References)：

• [1]王春丽.聚合物浓度检测方法分析[J].中国石油和化工标准与质量,2012,21(7):11.
• [2]曹瑞波,王晓玲,韩培慧,等.聚合物驱多段塞交替注入方式及现场应用[J].油气地质与采收率,2012,19(3):71-73.
• [3]赵福麟.油田化学[M].东营:石油大学出版社,2000.
• [4]孔柏岭,唐金星,谢峰.聚合物在多孔介质中水动力学滞留研究[J].石油勘探与开发,1998,25(2):68-701.
• [5]苗建生,赵福麟,李爽,等.地层中滞留聚合物的存在形式和分布状态探讨[J].特种油气藏,2005,12(3):88-90.
• [6]徐永春,李秀生,付大强,等.岩心中黏土含量对聚合物滞留与捕集的影响[J].内蒙古石油化工,2008,18(19):140-142.
• [7]高恒达.利用聚合物驱后地层残留聚合物封堵大孔道[J].油气田地面工程,2007,26(1):27-28.
• [8]陈云霄,李峰,邱勇,等.聚合物滞留物的降解与清除方法[J].河南石油,2003,17(增刊1):59-60.
• [9]由庆,穆丽娜,何龙,等.聚合物驱后地层滞留聚合物相对分子质量和水解度变化对其再利用效果的影响[J].钻采工艺,2007,30(3):121-122.
• [10]贾振岐,盖德林,杨兴华.正韵律油层聚合物驱后滞留聚合物分布[J].大庆石油学院学报,2007,31(4):110-112.
• [11]侯健,李振泉,陈月明.利用三维网络模型研究滞留聚合物微观分布规律[J].计算力学学报,2006,23(4):453-458.
• [12]祝仰文,曹绪龙,宋新旺.用三维非均质模型研究聚合物分布规律[J].石油钻采工艺.2006,28(6):39-41.
• [13]张忠杰,马代鑫,徐赋海.阳离子二元复合物与HPAM的相互作用研究[J].石油天然气学报,2008,30(2):582-584.
• [14]杨树人,于超,刘丽丽,等.交替注入聚合物驱油的水动力学机理[J].大庆石油地质与开发,2014,33(3):118-121.
• [15]张博为.超低流度油藏水驱和聚合物驱特征实验[J].大庆石油地质与开发,2015,34(3):114-119.
• [16]刘文业.聚合物驱油井产出液中聚合物浓度的准确测定方法[J].油气地质与采收率,2006,13(2):91-92.
• [17]由庆,赵福麟,穆丽娜,等.测定聚合物驱油井产出液中聚丙烯酰胺浓度的新方法[J].石油学报(石油加工),2007,23(1):109-113.
• [18]邓景夫,李云鹏,吴晓慧,等.海上稠油油田早期聚合物驱见效规律[J].特种油气藏,2015,22(3):128-130.
• [19]周万富,张世东,李萍,等.聚驱后堵水调剖新工艺的设计及应用[J].大庆石油地质与开发,2014,33(6):83-86.
• [20]王德民,程杰成,吴军政,等.聚合物驱油技术在大庆油田的应用[J].石油学报,2005,26(1):74-78.