陈国刚
CHEN Guogang

• 1:大庆油田有限责任公司第七采油厂

摘要(Abstract)：

在葡萄花油田南部区块现场应用2口水平井,结合生产资料分析认为其采用的普通射孔工艺未达到理想效果。为提高水平井开发效果,提出在水平井射孔中应用新方法,即应用深穿透、合理孔密、合理相位角、分层、分段射孔工艺技术,并根据储层的孔渗特征与油气流体运移特点进行射孔调剖的技术思路。在葡萄花油田南部区块后续应用水平井中,采用深穿透、合理孔密、合理相位角、分层、分段射孔及射孔调剖工艺技术,可以改善油层开发效果。
The field application of two horizontal wells in the southern block of Putaohua Oilfield and the analysis of the oilfield production data show that the adopted common perforating technology has not achieved the ideal effects. In order to improve the development effects,the new method applied in the horizontal well perforation was put forward i. e. the with the help of the deep penetration,reasonable hole density and phase angle,layered and segmented perforating techniques,and moreover according to the reservoir poroperm characteristics and the oil and gas fluid migration properties,the technical thinking of the perforated profile control and adjustment was established. The new method applied in the southern block of Putaohua Oilfield has improved the reservoir development effects and gained much better field achievements.

关键词(KeyWords)： 深穿透;孔密;相位角;分层;分段;射孔调剖
deep penetration;hole density;phase angle;layered;sectionalized/staged/graded/segmented;perforated profile control and adjustment

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 陈国刚
CHEN Guogang

DOI: 10.19597/J.ISSN.1000-3754.201711039

参考文献(References)：

• [1]王晓冬,刘慈群.水平井产量递减曲线及其应用方法[J].石油勘探与开发,1996,23(4):50-53.
• [2]郭肖,杜志敏.非均质性对水平井产能的影响[J].石油勘探与开发,2004,31(1):91-93.
• [3]牛彦良,李莉.特低丰度油藏水平井开发技术研究[J].大庆石油地质与开发,2006,25(2):28-33.
• [4]徐克彬,尹爱春,顾维军.水平井选择性完井[J].石油钻采工艺,1998,20(4):1-2.
• [5]周海民,常学军,郝建明,等.冀东油田复杂断块油藏水平井开发与实践[J].石油勘探与开发,2006,33(5):622-629.
• [6]相健民,塔里木油田水平井高效开发技术[J].石油勘探与开发,2006,33(6):722-728.
• [7]王艳.水平井水平段方位与最大主应力夹角对产能影响分析[J].非常规油气,2016,19(5):22-15.
• [8]李红爽.辽河油田水平井找堵水技术研究与应用[J].中外能源,2015,26(4):34-35.
• [9]窦宏恩.油田开发中水平井主要参数设计方法[J].特种油气藏,2012,21(6):10-12.
• [10]王大为,李小平.井眼轨迹对水平井流入动态的影响[J].岩性油气藏,2013,17(3):35-37.