深度调剖数值模拟研究与应用Research and application of numerical model of profile control in-depth
李梅,康志江
LI Mei;et al. (Zhejiang University;
摘要(Abstract)：
根据凝胶深度调剖的驱油机理,收集总结了国内外的有关数学模型,建立了三维三相八组分数学模型。模型考虑了调剖过程中的多种因素,主要包括交联反应过程中的组分产生和损耗、化学组分的吸附和滞留、一价和二价离子的质量交换、地面成胶调剖、凝胶的降解、流动性能以及化学组分对水相粘度和渗透率下降系数的影响等,经过多个区块的实际验算,符合程度较高。本文以大庆某井组为例,进行了不同开发方式及参数的计算,为提高油藏采收率提供了科学依据。
In this paper,a numerical model with three- dimention, three- phase and eight- ingredient is set up according to oil displacement mechanism of profile control in- depth of gels,based on relative numerical models at home and abroad.Many factors are included in the model at the course of profile control,which are elements creating and depleting in crosslinking reaction,elements adsorption and placement,exchange of ion plus 1 and plus 2,profile control of bulk gels,gels degradation,gels fluidity and fall coefficients of element phase viscosity and phase permeability against water,and so on.The model is applied to many oilfields and the results of numerical model are much closer to realities. For example, the model is applied to one well group of Daqing oilfield with calculation at different development schemes and parameters to provide scientific basis for enhancing oil recovery.
关键词(KeyWords)：
深度调剖;数值模拟;三次采油;凝胶
profile control in- depth;numerical simulation;tertiary oil recovery;gels
基金项目(Foundation):
作者(Authors):
李梅,康志江
LI Mei;et al. (Zhejiang University;
参考文献(References)：
- [1]CAMILLERID,ENGELSENS,LAKELW DescriptionofanImprovedCompositionalMicellar/PolymerSimulator[R] SPE13967,1987
- [2]MACKJC,SMITHJE In DepthColloidalDispersionGelsImproveOilRecoveryEfficiency[R] SPE/DOE27780,presentedattheSPE/DOENinthSymposiumonImprovedOilRecovery,Tulsa,OK,April17 20,1994
- [3]TODDBJ,WILLHITEGP,GREENDW AMathematicalModelofInSituGelationofPolyacrylamidebyaRedoxProcess[R] SPE/DOE20215,presentedattheSPE/DOESeventhSymposiumonEnhancedOilRecovery,Tulsa,OK,April22 25,1990
- [4]GAOHW,CHANGMM AThree Dimensional,Three PhaseSimulatorforPermeabilityModificationTreatmentsUsingGelledPolymers[R] DOEReportNIPER 388,1990
- [5]王玉琢,张振杰,曹宝良,等 精细化学调剖技术在油田调整挖潜中的应用[J] 大庆石油地质与开发,2002,21(1):43 45
- [6]卢祥国,张世杰,陈卫东,等 影响矿场交联聚合物成胶效果的因素分析[J] 大庆石油地质与开发,2002,21(4):61 64
- [7]赵清萍,赵春燕,胡 勇 复合离子型调剖剂性能及影响因素分析[J] 大庆石油地质与开发,2003,22(3):82 84
- [8]费毅忠,姜喜庆,杜晓明 复合离子聚合物整体调剖效果[J]大庆石油地质与开发,2003,22(4):58 60
- [9]SMITHJE TheTransitionPressure:AQuickMethodforQuantifyingPolyacrylamideGelStrength[R] SPE18739,presentedattheSPEInternationalSymposiumonOilfieldChemistryinHouston,TX,February8 10,1989
- [10]袁士义 聚合物地下交联调剖数学模型[J] 石油学报,1991(1)
- [11]李福垲 黑油和组分模型的应用[M] 北京;石油工业出版社,1996
- [12]袁士义,韩 冬,王 强,等 调驱结合数学模型[C] SPE64792