邹高峰,舒志国,郑爱维,方栋梁,卢文涛,张谦,魏来,曹晨光
ZOU Gaofeng,SHU Zhiguo,ZHENG Aiwei,FANG Dongliang,LU Wentao,ZHANG Qian,WEI Lai,CAO Chenguang

• 1:中国石化江汉油田分公司勘探开发研究院

摘要(Abstract)：

为提高低渗透油藏原油采收率,开展了低界面张力的超微CO_2泡沫的制备方式优选。通过实验对比恒速搅拌和多孔介质2种类型5种发泡方式,考虑不同搅拌速率、填料粗细及填料类型等方法制备超微CO_2泡沫,优选出了适合低渗透油藏驱油的超微CO_2泡沫发泡方式。结果表明:恒速搅拌发泡模型(6 000 r/min)、120目石英砂充填填砂管模型产生的超微CO_2泡沫效果最好,泡沫量多且尺寸细腻均匀,泡沫在地层压力条件下尺寸可达6.25～31.26μm,达到超微泡沫尺寸要求;通过低渗透岩心超微CO_2泡沫注入性能实验测试,阻力系数为8.32～15.33,驱油效果良好,适合低渗透油藏CO_2泡沫驱开发和应用。
In order to enhance the oil recovery in low-permeability oil reservoirs, the optimal preparing method of ultra-micro CO_2 foam with low interfacial tension was developed. By comparing two types of constant speed agitation and porous media with five foaming modes, considering different stirring speed rates, the sizes of the packing material and the type of the packing material, the preparation of the superfine CO_2 foam was developed, the optimal foaming mode was selected for the ultra-micro CO_2 foam suitable for the oil flooding in the low-permeability reservoirs. The results show that the ultra-micro CO_2 foams produced by the constant-speed stirring foaming model(6 000 r/min) and 120-mesh-quartz-sand filled pipe model have the best effects, with a large number of the foams and fine-uniform sizes. The foams can reach the sizes of 6.25-31.26 μm under the formation pressure, which can meet the requirements of the superfine foams. Through the experimental test of the ultra-micro CO_2 foam injection performance in the low-permeability core, the resistance coefficient is 8.32-15.33, and the displaced effects are much better, which indicate that the CO_2 foam flooding is suitable for the development and application in the low-permeability oil reservoir.

关键词(KeyWords)： 低渗透;超微CO_2泡沫;起泡剂;制备与表征;高矿化度;高钙镁离子
low permeability;ultra-micro/superfine CO_2 foam;foaming agent;preparation and characterization;high salinity;high calcium and magnesium ions

Abstract:

Keywords:

基金项目(Foundation): 国家科技重大专项“涪陵页岩气开发示范工程”(2016ZX05060);; 中国石化“十条龙”重大科技攻关项目“涪陵页岩气田焦石坝区块稳产技术”(P18052)

作者(Author): 邹高峰,舒志国,郑爱维,方栋梁,卢文涛,张谦,魏来,曹晨光
ZOU Gaofeng,SHU Zhiguo,ZHENG Aiwei,FANG Dongliang,LU Wentao,ZHANG Qian,WEI Lai,CAO Chenguang

DOI: 10.19597/j.issn.1000-3754.201904032

参考文献(References)：

• [1]赵瑞东,吴晓东,熊春明,等.泡沫油国内外研究进展[J].特种油气藏,2012,19(1):17-22.ZHAO Ruidong,WU Xiaodong,XIONG Chunming,et al.Research progress of foam oil at home and abroad[J].Special Oil & Gas Reservoirs,2012,19(1):17-22.
• [2]计秉玉.国内外油田提高采收率技术进展与展望[J].石油与天然气地质,2012,33(1):111-117.JI Bingyu.Technical progress and prospects of enhanced oil recovery in domestic and foreign oilfields [J].Oil & Gas Geology,2012,33(1):111-117.
• [3]王其伟.泡沫驱油发展现状及前景展望[J].石油钻采工艺,2013,35(2):94-97.WANG Qiwei.Development status and prospect of foam flooding [J].Oil Drilling & Production Technology,2013,35(2):94-97.
• [4]FARAJZADEH R,ANDRIANOV A,ZITHA P L J.Investigation of immiscible and miscible foam for enhancing oil recovery [J].Industrial & Engineering Chemistry Research,2010,49(4):1910-1919.
• [5]周玉萍.江汉油田高盐油藏低界面张力泡沫驱提高采收率研究[J].油田化学,2017,34(1):92-95.ZHOU Yuping.Research on enhanced oil recovery with low interfacial tension foam flooding in high-salt reservoirs of Jianghan Oilfield [J].Oilfield Chemistry,2017,34 (1):92-95.
• [6]周迅,吴发英,吴莎,等.CO2泡沫封堵能力评价实验研究[J].内蒙古石油化工,2014,40(17):152-154.ZHOU Xun,WU Faying,WU Sha,et al.Experimental study on the plugging capacity evaluation of CO2 foam [J].Inner Mongolia Petrochemical Industry,2014,40(17):152-154.
• [7]张营华.CO2泡沫剂的气溶性与封堵性研究[J].科学技术与工程,2017,17(21):233-235.ZHANG Yinghua.Study on gas solubility and plugging of CO2 foam [J].Science Technology and Engineering,2017,17(21):233-235.
• [8]赵江玉,蒲万芬,李一波,等.耐高温高盐泡沫体系筛选与性能评价[J].天然气与石油,2014,32(4):65-69.ZHAO Jiangyu,PU Wanfen,LI Yibo,et al.Screening and performance evaluation of high-temperature and high-salt foam systems [J].Natural Gas & Oil,2014,32(4):65-69.
• [9]刘丽,万雪,杨坤,等.低渗透储层 CO2泡沫体系的筛选与性能评价[J].石油化工高等学校学报,2016,29(4):62-65.LIU Li,WAN Xue,YANG Kun,et al.Screening and performance evaluation of CO2 foam system in low permeability reservoir [J].Journal of Petrochemical University,2016,29(4):62-65.
• [10]刘丽,宋考平,王禹,等.CO2-泡沫体系的高温P-Y特性研究[J].科学技术与工程,2014,14(30):135-139.LIU Li,SONG Kaoping,WANG Yu,et al.High-temperature P-Y characteristics of CO2-foam system [J].Science Technology and Engineering,2014,14(30):135-139.
• [11]宋鹤,章杨,陈百炼,等.高温高矿化度CO2泡沫性能实验研究[J].油田化学,2013,30(3):380-383.SONG He,ZHANG Yang,CHEN Bailian,et al.Experimental study on high temperature and high salinity CO2 foam performance [J].Oilfield Chemistry,2013,30(3):380-383.
• [12]章杨,张亮,陈百炼,等.高温高压CO2泡沫性能评价及实验方法研究[J].高校化学工程学报,2014,16(3):535-541.ZHANG Yang,ZHANG Liang,CHEN Bailian,et al.Performance evaluation and experimental methods of high-temperature and high-pressure CO2 foam [J].Journal of Chemical Engineering of Chinese Universities,2014,16(3):535-541.
• [13]于春涛.CO2泡沫驱体系筛选与评价[J].油田化学,2014,31(3):377-379.YU Chuntao.Screening and evaluation of CO2 foam flooding system [J].Oilfield Chemistry,2014,31(3):377-379.
• [14]王杰祥,陈征,冯传明,等.低渗透油藏超临界二氧化碳泡沫封堵实验研究[J].科学技术与工程,2014,14(30):131-134.WANG Jiexiang,CHEN Zheng,FENG Chuanming,et al.Experimental study on supercritical carbon dioxide foam plugging in low permeability reservoirs [J].Science Technology and Engineering,2014,14(30):131-134.
• [15]刘祖鹏,李宾飞,赵方剑.低渗透油藏CO2泡沫驱室内评价及数值模拟研究[J].石油与天然气化工,2015,44(1):70-74.LIU Zupeng,LI Binfei,ZHAO Fangjian.Indoor evaluation and numerical simulation of CO2 foam flooding in low permeability reservoirs [J].Chemical Engineering of Oil and Gas,2015,44(1):70-74.
• [16]李松岩,李兆敏,李宾飞,等.泡沫驱替过程中阻力因子与岩心气相饱和度的变化[J].油田化学,2016,33(2):266-270.LI Songyan,LI Zhaomin,LI Binfei,et al.Changes of resistance factor and core gas phase saturation during foam displacement [J].Oilfield Chemistry,2016,33(2):266-270.
• [17]史胜龙,王业飞,周代余,等.微泡沫体系直径影响因素及微观稳定性[J].东北石油大学学报,2016,40(1):103-110.SHI Shenglong,WANG Yefei,ZHOU Daiyu,et al.Diameter influencing factors and micro-stability of micro foam system [J].Journal of Northeast Petroleum Uiversity,2016,40(1):103-110.