何鑫
HE Xin

• 1:大庆油田责任有限公司勘探开发研究院

摘要(Abstract)：

水平井压裂是致密油藏开发的必要技术手段。为了给出致密油水平井压裂的合理裂缝参数,以大庆油田致密油储层为例,使用油藏数值模拟软件Radial-X建立模型,模拟了致密油水平井压裂生产过程。结果表明,致密油仅在井、缝附近发生渗流,水平井开发的控制范围由水平段长度和压裂改造的缝长、缝密决定。通过水力压裂的裂缝参数敏感性分析得出:裂缝导流能力增加到一定程度即可达到增加水平井产能的目的;增加裂缝数量能提高水平井产能,但是水平井多条裂缝会互相干扰,大庆油田致密油高台子储层2 km井长模型5 a的最优裂缝条数约为20条,扶杨储层5 a的最优裂缝条数约为15条;增加裂缝长度对压后生产有利,但随着裂缝长度增加,产量增加幅度会减小。
Horizontal well fracturing is the necessary technical method of the development of tight oil reservoir. In order to give the proper parameters of the fracturing in horizontal wells,taking the tight oil reservoir in Daqing Oilfield as an example,with the help of Software Radial-X in the reservoir numerical simulation,the model was established to simulate the productive process of the horizontal well fracturing in the tight oil reservoir. The results show that the seepage of the tight oil only occurs near the wells and fractures,and the controlled development range by the horizontal well is determined by the length of the horizontal section and the length and density of fractured cracks. The sensitivity analysis of the hydraulic fracturing parameters shows that when the fracture productivity increased to a certain extent,the incremental productivity target of the horizontal well can be achieved; the increase of the fracture number can enhance the productivity of the horizontal well,but the multi-fractures will interfere with each other,the model with 2 000 m well length shows that the five-year optimal fracture number is about 20 in Gaotaizi tight oil reservoir in Daqing Oilfield,while the five-year optimal fracture number is about 15 in Fuyang reser-voirs; the increased fracture length is favorable to the post-fracturing production,but with the rise of the fracture length,the incremental amplitude of the production will be reduced.

关键词(KeyWords)： 致密油;压裂;数值模拟;裂缝参数;水平井
tight oil;fracturing;numerical simulation;fracture parameter;horizontal well

Abstract:

Keywords:

基金项目(Foundation): 国家科技重大专项“松辽盆地致密油开发示范工程”(2017ZX05071)

作者(Author): 何鑫
HE Xin

DOI: 10.19597/j.issn.1000-3754.201801090

参考文献(References)：

• [1]蒲春生,石道涵,何举涛,等.致密砂岩油藏水平井/直井联合注采整体压裂优化技术[M].东营:中国石油大学出版社,2015:1-11.
• [2]贾承造,邹才能,李建忠,等.中国致密油评价标准、主要类型、基本特征及资源前景[J].石油学报,2012,33(3):343-350.
• [3]房平亮,冉启全,刘立峰,等.致密储层低产井重复压裂方式及裂缝参数优化[J].科学技术与工程,2017,24(17):30-37.
• [4]李志强,赵金洲,胡永全.致密油层多区体积压裂产能预测[J].油气地质与采收率,2016,23(1):134-138.
• [5]苏煜彬,林冠宇,韩悦.致密砂岩储层水力加砂支撑裂缝导流能力[J].大庆石油地质与开发,2017,36(6):140-145.
• [6]李帅,丁云宏,才博,等.致密油藏体积压裂水平井数值模拟及井底流压分析[J].大庆石油地质与开发,2016,35(4):156-160.
• [7]梁宏儒,薛海涛,卢双舫,等.致密油藏水平井水力压裂CO2吞吐参数优化[J].大庆石油地质与开发,2016,35(4):161-167.
• [8]赵立强,牟媚,罗志锋,等.中国致密油储层改造理念及技术展望[J].西南石油大学学报(自然科学版),2016,38(6):111-118.
• [9]纪天亮,卢双舫,唐明明,等.致密油藏水平井压裂后产能预测方法[J].大庆石油地质与开发,2016,35(2):165-169.
• [10]安永生,戴涛.压裂水平井一体化耦合数值模拟方法[J].大庆石油地质与开发,2016,35(5):86-91.
• [11]王言,郑强,马崇尧,等.t Navigator油藏数模软件在低渗油藏压裂优化中的应用[J].新疆石油天然气,2016,12(3):29-43.
• [12]王晓莲,郑建东,章华兵,等.长垣南地区扶余致密油层物性下限确定及分类[J].大庆石油地质与开发,2015,34(6):148-153.
• [13]吴奇.水平井体积压裂改造技术(总册)[M].北京:石油工业出版社,2013:10-26.