王冬梅,韩大匡,侯维虹,曹瑞波,武力军
WANG Dong-mei1,2,HAN Da-kuang1,HOU Wei-hong2,CAO Rui-bo2

• 1:中国石油勘探开发研究院
• 2:中国石油勘探开发研究院
• 3:大庆油田有限责任公司勘探开发研究院
• 4:大庆油田有限责任公司勘探开发研究院

摘要(Abstract)：

聚合物驱过程中的注入剖面变化在注聚初期,其吸水剖面与水驱基本相同,聚合物溶液还是主要进入高渗透层,随着高渗透层渗流阻力的增加,聚合物溶液开始进入低渗透层,注入剖面得到改善。随着低渗透层聚合物溶液的不断进入,其渗流阻力增加,导致其吸水比例逐渐下降,吸水剖面出现返转。其吸水变化类型主要有一次返转型、二次或多次返转型和不返转型。通过对现场实际资料的研究表明:①在注聚过程中,各沉积单元相对吸水量往复变化;②注聚过程中,低渗透层剖面返转时机先于中渗透层;③低渗透层注聚剖面第二次返转时相对吸水量峰值低于第一次返转时的峰值;④高渗透层的厚度比例越大,聚合物调整低渗透层吸水剖面能力越差;⑤聚驱全过程中,高渗透层的累积吸水量仍大于中、低渗透层;⑥绝大多数单元的吸水剖面在吸水指数、含水下降期发生初次返转。另外,相对于一类油层聚合物驱,二类油层具有返转出现时间早于一类油层、返转幅度大于一类油层等特点。
At the beginning of changing of injection profile during polymer flooding,the changing law is similar to those occurred in water flooding.Polymer solution is pushed into high permeability layers first and then into lower ones as flow resistance increases in high permeability layers,improving injection profile.The more polymer solution enters the low permeability layers,the more resistance is got.Consequently,the proportion of water intake declines and the peak value of profile starts to reverse.There are 3 types of profile changing: once profile reversal,twice or times profile reversal and none profile reversal.Study on field data shows that,the changing law of profile reversal within the first class oil zones and the second class oil zones in Daqing can be summarized as follows:(1) Relative water intake volumes are changing reduplicate among sedimentary units during polymer flooding;(2) Arisen time of profile reversal in low permeability layers is earlier than that in mid-permeability layers;(3) Peak value of relative water intake when the second time profile reversed in low permeability layers is less than that happened in the first time;(4) The higher the proportion of the thickness in high permeability layers,the lower ability is to adjust water intake profile by polymer in low permeability layers;(5) Cumulative water intake volumes in high permeability layers are more than that in low or mid-permeability layers;(6) Most of the first profile reversal time occur at the location when water injectivity decreases or the period of water cut declines.In addition,the time of profile reversal occurred in the second class oil zones is earlier than that in the first class,and the range of reversal is larger than that in the first class.

关键词(KeyWords)： 剖面返转;返转规律;返转类型;吸水剖面
profile reversal;changing laws of profile reversal;type of profile reversal;water intake profile

Abstract:

Keywords:

基金项目(Foundation): 中国石油天然气股份公司科技攻关项目“大庆喇萨杏油层剩余油分布预测及综合挖潜技术研究”的部分成果(编号为060114-1)

作者(Author): 王冬梅,韩大匡,侯维虹,曹瑞波,武力军
WANG Dong-mei1,2,HAN Da-kuang1,HOU Wei-hong2,CAO Rui-bo2

参考文献(References)：

• [1]王建.利用聚合物产出液浓度剖面模型确定不可入孔隙体积和滞留孔隙体积[J].油田地质与采收率,2003,10(6):55-58.
• [2]高淑玲,周正祥,刘红兵.改善杏十三试验区聚合物驱效果研究[J].大庆石油地质与开发,2005,24(6):74-76.
• [3]曹瑞波,丁志红,刘海龙,等.低渗透油层聚合物驱渗透率界限及驱油效率实验研究[J].大庆石油地质与开发,2005,24(5):71-73.
• [4]胡锦强.高浓度聚合物驱油体系对不同渗透油层的动用状况研究[J].油田化学,2006,23(1):85-87.
• [5]王凤兰,王天望,李丽娟.萨中地区聚合物驱前后密闭取心井驱油效果及剩余油分析[J].大庆石油地质与开发,2004,23(2):59-60.
• [6]陈鹏,邵振波,刘英杰.中、低渗透油层相对分子质量的确定方法[J].大庆石油地质与开发。2005,24(3):95-96.
• [7]吴文祥.高浓度聚合物注入时机及段塞组合对驱油效果的影响[J].油田化学。2005,22(4):332-335.
• [8]苏延昌,刘德宽,高峰,等.污水配制高分子高浓度聚合物驱油试验研究[J].大庆石油地质与开发,2006,25(3):82-84.
• [9]李洪玺,刘全稳,王健,等.弱凝胶在多孔介质中的运移规律研究[J].大庆石油地质与开发,2006,25(1):88-90.
• [10]陈庆海,杨付林,刘英杰,等.低剪切速率下部分水解聚丙烯酰胺溶液的流变特性研究[J].大庆石油地质与开发,2006,25(1):91-92.
• [11]檀国荣,邹立壮,王金木,等.聚合物对原油乳状液破乳效果影响的实验研究[J].大庆石油地质与开发,2006,25(1):93-94.
• [12]韩培慧,么世椿,李治平,等.聚合物与碱/表面活性剂交替注入物理模拟实验研究[J].大庆石油地质与开发,2006,25(1):95-97.
• [13]韩培慧,么世椿,张淑英,等.大庆油田南二区聚合物与碱/表面活性剂交替注入数值模拟研究[J].大庆石油地质与开发,2006,25(2):75-77.
• [14]孔枫,刘玉明,姜维东,等.涠洲11-4油田聚合物驱物理模拟研究[J].大庆石油地质与开发,2006,25(2):78-80.