侯雨辰,朱焱,潘登,陈诚,高文彬,李宜强
HOU Yuchen,ZHU Yan,PAN Deng,CHEN Cheng,GAO Wenbin,LI Yiqiang

• 1:大庆油田有限责任公司油气田开发软件研发应用项目经理部
• 2:大庆油田有限责任公司第一采油厂
• 3:油气资源与探测国家重点实验室
• 4:中国石油大学石油工程教育部重点实验室

摘要(Abstract)：

随着持续几十年的注水开发,大庆油田已逐渐步入高含水甚至特高含水阶段,油藏及流体的非均质性使优势通道更加发育,大量剩余油多集中在平面弱波及区域,如何进一步深入挖潜平面剩余油已成为矿场EOR(强化采油)的主要矛盾。在聚驱开发基础上,运用非均质油藏的数值模拟及平面物理模型的室内驱替实验,提出了控制采油井流压进一步改善平面开发矛盾的方法。研究结果表明:流压调整需充分考虑聚驱过程油墙富集的影响,在低含水期流压调整可使剩余油动用更加均匀,流压调整需考虑层内物性等因素,并形成了"含水下降期流压略微提升,低含水期反向调整,含水回升期恒定调整"的调整模式。该调整模式应用于矿场效果较好。
With the continuous development of water injection for decades, Daqing Oilfield has stepped into the stages of high watercut and even ultra-high watercut, in which the heterogeneity of the reservoir and fluid makes the dominant channels more developed, and a large amount of remained oil has been trapped in the weakly swept area on plane. Therefore, how to further tap the potential of the planar remained oil has become the principle contradiction in the field EOR. On the basis of the polymer flooding, with the help of the numerical simulation of the heterogeneous reservoirs and indoor flooding experiments of the planar physical model, the suggestion of further improving the planar development contradiction was proposed by means of controlling the flowing pressure of the oil well. The study results show that the influence of the enriched oil bank should be fully considered in the process of polymer flooding for the flowing pressure adjustment. In the low watercut period, the flowing pressure adjustment can make the remained oil producing more evenly; the adjustment needs considering the physical properties and other factors in the reservoir, and the adjustment mode has been formed, i.e.,the flowing pressure slightly increased in the watercut decline stage, reversely adjusted in the low watercut stage, and constantly adjusted in the watercut rising stage. The adjusting mode has been applied in the field with good effect.

关键词(KeyWords)： 聚合物驱;流动压力;提高采收率;驱油效果
polymer flooding;flowing pressure;enhanced recovery;oil displacement efficiency

Abstract:

Keywords:

基金项目(Foundation): 国家科技重大专项“大庆长垣特高含水油田提高采收率示范工程”(2016ZX05054)

作者(Author): 侯雨辰,朱焱,潘登,陈诚,高文彬,李宜强
HOU Yuchen,ZHU Yan,PAN Deng,CHEN Cheng,GAO Wenbin,LI Yiqiang

DOI: 10.19597/j.issn.1000-3754.201912031

参考文献(References)：

• [1]廖广志，王强，王红庄，等.化学驱开发现状与前景展望[J].石油学报，2017,38(2):196-207.LIAO Guangzhi,WANG Qiang,WANG Hongzhuang,et al.Chemical flooding development status and prospect[J].Acta Petrolei Sinica,2017,38(2):196-207.
• [2]刘哲宇，李宜强，高文彬，等.纵向非均质油藏聚合物变阻力渗流规律实验研究[J].新疆石油地质，2017,38(3):331-336.LIU Zheyu,LI Yiqiang,GAO Wenbin,et al.Experimental study on the variable flow resistance during polymer flooding in vertically heterogeneous reservoirs[J].Xinjiang Petroleum Geology,2017,38(3):331-336.
• [3]杨晶，朱焱，李建冰，等.聚合物驱剖面返转时机及其影响因素[J].油田化学，2016,33(3):472-476.YANG Jing,ZHU Yan,LI Jianbing,et al.Influence factors of profile reversal opportunity during polymer flooding[J].Oilfield Chemistry,2016,33(3):472-476.
• [4]朱焱，高文彬，李瑞升，等.变流度聚合物驱提高采收率作用规律及应用效果[J].石油学报，2018,39(2):189-200,246.ZHU Yan,GAO Wenbin,LI Ruisheng,et al.Action laws and application effect of enhanced oil recovery by adjustable-mobility polymer flooding[J].Acta Petrolei Sinica,2018,39(2):189-200,246.
• [5]高飞，何玉发，陈昱林.油井合理井底流压的确定[J].重庆科技学院学报(自然科学版),2014,16(5):30-32.GAO Fei,HE Yufa,CHEN Yulin.Determination of reasonable flowing pressure for production of oil well[J].Journal of Chongqing University of Science and Technology(Natural Science Edition),2014,16(5):30-32.
• [6]金贤镐，王月英.聚合物驱地层压力与流动压力控制界限研究[C].西安：2018油气田勘探与开发国际会议(IFEDC 2018)论文集，2018 .JIN Xianhao,WANG Yueying.Study on the control boundary of formation pressure and flow pressure of polymer flooding[C].Xi’an:2018IFEDC International Field Exploration and Development Conference,2018 .
• [7]周丛丛，崔长玉，郭松林.聚合物驱生产井流压特征规律分析及影响因素研究[J].特种油气藏，2019,26(5):112-117.ZHOU Congcong,CUI Changyu,GUO Songlin.Flowing pressure performance analysis and its influencing factors in polymer flooding production well[J].Special Oil & Gas Reservoirs,2019,26(5):112-117.
• [8]李雪梅，王利，段忠华，等.非均质油藏压力系统调整问题探讨[J].化学工程与装备，2011(9):107-108.LI Xuemei,WANG Li,DUAN Zhonghua,et al.Discussion on the adjustment of heterogeneous reservoir pressure system[J].Chemical Engineering & Equipment,2011(9):107-108.
• [9]殷代印，王东琪，张承丽.改善注聚油层动用程度的合理压力系统[J].石油化工高等学校学报，2015,28(6):55-60.YIN Daiyin,WANG Dongqi,ZHANG Chengli.Reasonable pressure system for improvement of use degree of polymer injection layers[J].Journal of Petrochemical Universities,2015,28(6):55-60.
• [10]李宜强.聚合物驱大平面模型物理模拟实验研究[D].北京：中国科学院研究生院，2006.LI Yiqiang.Experimental studies of physical simulation on polymer flooding in the large-scale areal models[D].Beijing:University of Chinese Academy of Sciences,2006.
• [11]李宜强，隋新光，李斌会.聚合物驱后提高采收率方法室内实验研究[J].石油学报，2008,29(3):405-408.LI Yiqiang,SUI Xinguang,LI Binhui.Experimental reserch in laboratory on improving oil recovery after polymer flooding[J].Acta Petrolei Sinica,2008,29(3):405-408.
• [12]王志华，李宜强，钟会影.基于平面模型的微电极技术在聚合物驱油水前缘测定中的应用[C].西安：第九届全国渗流力学学术讨论会论文汇编，2007 .WANG Zhihua,LI Yiqiang,ZHONG Huiying.Application of microelectrode technology based on plane model in the determination of polymer flooding water front[C].Xi’an:The 9th National Symposium on Percolation Mechanics,2007 .
• [13]姜瑞忠，刘显太，赵伟，等.聚合物驱流度设计定量化方法研究[J].油气地质与采收率，2010,17(5):39-41.JIANG Ruizhong,LIU Xiantai,ZHAO Wei,et al.Study on quantitative method for mobility design in polymer flooding[J].Petroleum Geology and Recovery Efficiency,2010,17(5):39-41.
• [14]姜瑞忠，王公昌，姚征.考虑黏弹性效应的聚合物驱流度设计方法[J].新疆石油地质，2013,34(2):196-198.JIANG Ruizhong,WANG Gongchang,YAO Zheng.Mobility designing for polymer flooding considering the viscoelasticity effect[J].Xinjiang Petroleum Geology,2013,34(2):196-198.
• [15]赵明，赵伟，刘海成，等.复合驱流度设计方法研究[J].西南石油大学学报(自然科学版),2011,33(6):131-134,212.ZHAO Ming,ZHAO Wei,LIU Haicheng,et al.Study on the mobility design method for combination flooding[J].Journal of Southwest Petroleum University (Science & Technology Edition),2011,33(6):131-134,212.
• [16]谭锋奇，许长福，王晓光，等.砾岩油藏水驱与聚合物驱微观渗流机理差异[J].石油学报，2016,37(11):1414-1427.TAN Fengqi,XU Changfu,WANG Xiaoguang,et al.Differences in microscopic porous flow mechanisms of water flooding and polymer flooding for conglomerate reservoir[J].Acta Petrolei Sinica,2016,37(11):1414-1427.
• [17]王锦梅，陈国，历烨，等.聚合物驱油过程中形成油墙的动力学机理研究[J].大庆石油地质与开发，2007,26(6):64-66.WANG Jinmei,CHEN Guo,LI Ye,et al.A kinetic mechanism study on oil bank forming during polymer flooding [J].Petroleum Geology & Oilfield Development in Daqing,2007,26(6):64-66.[本文为“2019油气田勘探与开发国际会议”推荐论文]