喇萨杏油田的水驱波及体积估计Water flooding swept volume estimation of Salaxing oilfields
兰玉波,赵永胜
Lan Yu-bo; et al. ( Daqing Petroleum Institute;
摘要(Abstract):
通过对85口密闭取心检查井资料的统计分析,结合多层合采条件下油藏最可能的水驱控制程度研究,认为喇萨杏油田目前井网条件下平均水驱波及体积下限变化在76.5%~81.0%之间,同时对多层非均质条件下,不同厚度油层、不同含水阶段纵向波及系数及其变化的特点的研究表明,单层纵向波及系数在一定条件下可达到90.0%,甚至高于90.0%。事实上单层纵向波及系数差别较大,因此,如何提高水驱波及体积仍是油田开发后期一个值得认真研究的问题。
Through statistical analysis of the data from 85 sealing core drilling inspection wells, combining the study of the most possible water flooding control degree under the condition of multilayer recovery, this paper estimates the average water flooding swept volume lower limit variation range of Salaxing oilfields is 76. 5% -81.0%. At the same time, the study of vertical sweep efficiency and changing characteristics of reservoirs of different thickness and at different water cut stages under the condition of multilayer heterogeneity has shown that single layer vertical sweep efficiency can reach 90. 0% or even over 90% under certain conditions. In fact, single layer vertical sweep efficiencies vary significantly. Therefore , how to enhance water flooding swept volume is still a problem to be solved at the later stage of oil field development.
关键词(KeyWords):
多层非均质;水驱控制程度;水驱波及体积;水淹程度;水洗厚度;检查井
multilayer heterogeneity; water flooding control degree; water flooding swept volume; waterflooding degree, water washing thickness; inspection well
基金项目(Foundation):
作者(Authors):
兰玉波,赵永胜
Lan Yu-bo; et al. ( Daqing Petroleum Institute;
参考文献(References):
- [1]F F克雷格.油田注水开发工程方法[M].北京:石油化学工业出版社,1977.
- [2]周煦迪.油藏渗透率纵向非均质分布对水驱采收率的影响[J].石油勘探与开发,1997,24(2):51-54.
- [3]张广杰.改善新民裂缝性砂岩油藏注水波及体积研究[J].石油勘探与开发,1998,25(3):72-75.
- [4]孙林平.利用开发测井资料计算注入水的波及体积[J].测井技术,1997,22(3):219-223.
- [5]梁芹.吐哈油田温五块波及状况分析[J].新疆石油地质,2001,22(4):328-329.
- [6]张宝胜.喇萨杏油田各类油层水洗状况[J].大庆石油地质与开发,2002,12(6):40-43.
- [7]赵永胜.油层纵向扫及效率增长的一种可能解释[J].石油学报,1988,9(4):57-59.
- 多层非均质
- 水驱控制程度
- 水驱波及体积
- 水淹程度
- 水洗厚度
- 检查井
multilayer heterogeneity - water flooding control degree
- water flooding swept volume
- waterflooding degree, water washing thickness
- inspection well