殷方好,郑强,田浩然,张仲平,曲丽
YIN Fanghao,ZHENG Qiang,TIAN Haoran,ZHANG Zhongping,QU Li

• 1:胜利油田分公司采油工艺研究院

摘要(Abstract)：

氮气泡沫驱能有效改善稠油油藏蒸汽吞吐和水驱后期的开发效果。以辽河油田某区块莲花油层稠油油藏为对象,开展氮气泡沫驱研究。通过岩心驱替实验,确定了氮气泡沫驱的最佳气液比;利用油藏数值模拟技术,建立了三维地质模型,进行了目标区块历史拟合。在此基础上,优化了氮气泡沫驱注采设计方案,预测对比了方案实施后的效果。研究结果表明:目标区块宜采用注泡沫2个月后开井生产4个月的周期氮气泡沫驱开发方式,注入最佳气液比为1.3:1,发泡剂最佳使用质量分数为0.45%,单井注入速度为45 m~3/d;与同期注水开发预测结果相比,周期氮气泡沫驱的预测阶段采收率可提高6.09%。氮气泡沫驱技术可显著提高该区块稠油油藏采收率。
Nitrogen foam flooding can effectively improve the development results for the huff-and-puff and later water flooding of heavy oil reservoirs.Taking Lotus Layer of the heavy oil reservoirs in a block of Liaohe Oilfield as the study target,the nitrogen foam flooding study is conducted.Through the experiment of core displacement,the optimal ratio of the gas to liquid for the foam flooding is determined;with the help of the numerical simulating technique of an oil reservoir,the 3 D geological model is established and then the history match is engaged for the targel block.On the basis of the above,the design programs on the injection and production of the foam flooding are optimized,finally the effects of the program implementation are predicted and contrasted.The studies show that the development scheme i.e.the cyclic foam flooding of producing for 4 months after 2-month foam flooding is suitable for the target block,the optimal injection-production gas-to-liquid ratio is 1.3:1,the mass fraction most optimal used in the foaming agent is 0.45%,the injection rate of the individual well is 45 m /d;comparing with the predictec results of the water injection development in the same period,the forecast stage recovery of cyclic nitrogen foam flooding can be enhanced by 6.09%.Obviously,the technique of nitrogen foam flooding can remarkably improve the oil recovery of the heavy oil reservoirs in the block.

关键词(KeyWords)： 氮气泡沫驱;数值模拟;注采参数;稠油采收率;蒸汽吞吐
nitrogen foam flooding;numerical simulation;injection-production parameter;heavy oil recovery; huff and puff

Abstract:

Keywords:

基金项目(Foundation): 国家科技重大专项“热力开采后稠油油藏提高采收率技术”(2009ZX05009-004-05)

作者(Author): 殷方好,郑强,田浩然,张仲平,曲丽
YIN Fanghao,ZHENG Qiang,TIAN Haoran,ZHANG Zhongping,QU Li

参考文献(References)：

• [1]陆先亮,陈辉,栾志安,等.氮气泡沫热水驱油机理及实验研究[J].西安石油学院学报:自然科学版,2003,18(3):49-52.
• [2]周燕.弱边水普通稠油油藏蒸汽吞吐转氮气泡沫辅助蒸汽驱界限——以孤岛油田中二北Ng5为例[J].油气地质与采收率,2009,16(3):68-70.
• [3]王增林.强化泡沫驱提高原油采收率技术[M].北京:中国科学技术出版社,2007:93-96.
• [4]刘合,叶鹏,刘岩,等.注氮气泡沫控制水窜技术在油田高含水期的应用[J].石油学报,2010,31(1):91-95.
• [5]姜涛,肖林鹏,杨明强,等.超深层稠油油藏注天然气吞吐开发矿场试验[J].大庆石油地质与开发,2008,27(5):101-104.
• [6]王登庆,李维钟,朱彩虹.稠油油藏高含水及天然气吞吐出砂分析[J].大庆石油地质与开发,2008,27(6):91-93.
• [7]艾敬旭,王卫红,王经.蒸汽吞吐井注采参数优化设计[J].大庆石油地质与开发,2004,23(1):64-66.
• [8]陈维余,黄波,周济永,等.秦皇岛32-6油田强化氮气泡沫驱实验[J].大庆石油地质与开发,2011,30(5):39-43.
• [9]李淑红,吴玉杰,金力扬.注氮气泡沫控制无效循环技术在萨北油田的应用[J].大庆石油地质与开发,2006,25(增1):109-112.
• [10]王波,王鑫,刘向斌.高含水后期厚油层注氮气泡沫控水增油技术研究[J].大庆石油地质与开发,2006,25(6):59-60.