任岩,李晓明,晏信飞,王纯
REN Yan,LI Xiaoming,YAN Xinfei,WANG Chun

• 1:中国石油勘探开发研究院
• 2:成都市成华区人民政府办公室

摘要(Abstract)：

致密油气储层具有非均质性强、物性差、单井产量低、开发难度大等特点。为了准确识别高脆性层段、建立地层可压裂性模型,分析了可压裂性与岩石脆性、断裂韧性、抗压强度的关系,提出三者结合的可压裂性指数。研究表明,致密碳酸盐储层组成矿物简单,基于岩石力学参数法的脆性指数可以满足要求,较高的岩石脆性、较低的断裂韧性和抗压强度的地层为有利压裂层段。实例应用表明,新的预测方法能够准确刻画储层可压裂性,优选可压裂层段。
Tight oil and gas reservoirs are characterized by strong heterogeneity,poor physical properties,low single-well production,great development difficulty and so on. In order to identify the high-brittleness layer-interval and establish the fracability model accurately,the relationships between the fracability and the rock brittleness,fracture toughness and compressive strength were analyzed,and moreover the fracability index obtained by the above three properties was proposed. The study results show that the tight carbonate reservoir has the simple mineral compositions,and the brittleness index from the rock mechanical parameter method can meet the requirements. The formations with rather higher brittleness,lower fracture toughness and compressive strength are regarded as the much better fracturing layers. The case application shows that the new method can accurately characterize the fracability of the reservoirs and optimize the fractured intervals.

关键词(KeyWords)： 致密碳酸盐储层;水力压裂;岩石脆性;断裂韧性;抗压强度;可压裂性
tight carbonate reservoir;hydraulic fracturing;rock brittleness;fracture toughness;compressive strength;fracability

Abstract:

Keywords:

基金项目(Foundation): 国家科技重大专项“致密油甜点预测方法与甜点区评价”(2016ZX05046-002);; 国家重点基础研究发展计划“973”项目“致密油层地球物理评价”(2014CB239006);; 中石油集团科技部项目“深层与非常规物探新方法新技术”(2016A-3301)

作者(Author): 任岩,李晓明,晏信飞,王纯
REN Yan,LI Xiaoming,YAN Xinfei,WANG Chun

DOI: 10.19597/j.issn.1000-3754.201709005

参考文献(References)：

• [1]李红梅.微地震监测技术在非常规油气藏压裂效果综合评估中的应用[J].油气地质与采收率,2015,22(3):129-134.
• [2]傅成玉.非常规油气资源勘探开发[M].北京:中国石化出版社,2015:1-8.
• [3]Gunaydin O,Kahraman S,Fener M.Sawability prediction of carbonate rocks from brittleness indexes[J].The Journal of the South African Institute of Mining and Metallurgy,2004,104(4):239-243.
• [4]Yarali O,Kahraman S.The drillability assessment of rocks using the different brittleness values[J].Tunnelling and Underground Space Technology,2011,26(2):406-414.
• [5]梁利喜,丁乙,刘向君,等.硬脆性泥页岩井壁稳定渗流—力化耦合研究[J].特种油气藏,2016,23(2):140-143.
• [6]Rickman R,Mullen M J,Petre J E,et al.A practical use of shale petrophysics for stimulation design optimization:All shale plays are not clones of the Barnett Shale[R].SPE Technical Conference and Exhibition.Society of Petroleum Engineers,2008.
• [7]李进步,卢双舫,陈国辉,等.基于矿物学和岩石力学的泥页岩储层可压裂性评价[J].大庆石油地质与开发,2015,34(6):159-164.
• [8]Jin Xiaochun,Shah S N,Roegiers J C,et al.Fracability evaluation in shale reservoirs-an integrated petrophysics and geomechanics approach[J].SPE Journal,2014,20(3):518-526.
• [9]刘泠杉,胡明毅,高达,等.四川磨溪—高石梯地区龙王庙组层序划分及储层预测[J].大庆石油地质与开发,2016,35(5):42-47.
• [10]司马立强,陈志强,王亮,等.基于滩控岩溶型白云岩储层分类的渗透率建模方法研究:以川中磨溪—高石梯地区龙王庙组为例[J].岩性油气藏,2017,29(3):92-102.
• [11]Hucka V,Das B.Brittleness determination of rocks by different methods[J].International Journal of Rock Mechanics and Mining Sciences Geomechanics Abstracts,1974,11(10):389-392.
• [12]Howell J V.Book reviews:Glossary of geology and related sciences[J].Science,1957,126(3272):515.
• [13]Altindag R.Correlation of specific energy with rock brittleness concepts on rock cutting[J].Journal of the South African Institute of Mining and Metallurgy[J].2003,103(3):163-171.
• [14]李庆辉,陈勉,金衍,等.页岩脆性的室内评价方法及改进[J].岩石力学与工程学报,2012,31(8):1680-1685.
• [15]周辉,孟凡震,张传庆,等.基于应力—应变曲线的岩石脆性特征定量评价方法[J].岩石力学与工程学报,2014,33(6):1114-1122.
• [16]索彧,汪道兵,左乾坤,等.单轴加载页岩破坏全过程的声发射特征[J].大庆石油地质与开发,2016,35(2):159-164.
• [17]Aubertin M,Gill D E,Simon R.On the use of the brittleness index modified(BIM)to estimate the post-peak behavior of rocks[J].Aqua Fennica,1994,(23):24-25.
• [18]Tarasov B,Potvin Y.Universal criteria for rock brittleness estimation under triaxial compression[J].International Journal of Rock Mechanics and Mining Sciences,2013,59(4):57-69.
• [19]Munoz H,Taheri A,Chanda E K.Rock drilling performance evaluation by an energy dissipation based rock brittleness index[J].Rock Mechanics and Rock Engineering,2016,49(8):3343-3355.
• [20]Lawn B R,Marshall D B.Hardness Toughness and brittleness:An indentation analysis[J].Journal of American Ceramic Society,1979,62(7/8):347-350.
• [21]Quinn J B,Quinn G D.Indentation brittleness of ceramics:A fresh approach[J].Journal of Materials Science,1997,32(16):4331-4346.
• [22]Jarvie D M,Hill R J,Ruble T E,et al.Unconventional shale-gas systems:The Mississippian Barnett Shale of North-Central Texas as one model for thermogenic shale-gas assessment[J].AAPG Bulletin,2007,91(4):475-499.
• [23]Wang F P,Gale J F.Screening criteria for shale-gas systems[J].Gulf Coast Association of Geological Societies Transactions,2009,59:779-793.
• [24]Chang C D,Zoback M D,Khakser A.Empirical relations between rock strength and physical properties in sedimentary rocks[J].Journal of Petroleum Science and Engineering,2006,51:223-237.
• [25]Ning F L,Wu N Y,Li S,et al.Estimation of in-situ mechanical properties of gas hydrate-bearing sediments from well logging[J].Petroleum Exploration and Development,2013,40(4):542-547.
• [26]薛云飞,赵玉武,张威,等.室内水压致裂法测定岩石的断裂韧性[J].大庆石油地质与开发,2003,22(5):37-39.
• [27]陈顒,黄庭芳,刘恩儒.岩石物理学[M].合肥:中国科学技术出版社,2009:121-131.
• [28]Wong T F,David C,Zhu W.The transition from brittle faulting to cataclastic flow in porous sandstones:Mechanical deformation[J].Journal of Geophysical Research Solid Earth,1997,102(B2):3009-3025.
• [29]Per H.Estimating mechanical properties of shale from empirical correlations[J].SPE Drilling and Completion,2001,16(2):68-73.