徐晖,秦积舜,姜汉桥
XU Hui1,QIN Ji-shun2,JIANG Han-qiao1(1.Oil and Gas Engineering Academy

• 1:中国石油大学石油天然气工程学院
• 2:中国石油勘探开发研究院
• 3:中国石油大学石油天然气工程学院 北京102249
• 4:北京100083

摘要(Abstract)：

利用"高温高压复杂驱动体系三维物理模拟系统"进行了多元泡沫复合驱提高原油采收率宏观渗流机理的三维物理模拟研究。利用模型上布置的差压传感器和饱和度测量探针,测量了泡沫复合驱的开采效果、压力场和饱和度场,研究了泡沫复合驱提高波及效率与驱油效率的宏观渗流机理。泡沫驱提高采收率的机理是通过贾敏效应改善驱替液的波及体积和洗油效率,泡沫驱能够提高地层的整体压力,在井附近出现显著的压力降漏斗。主对角线两侧的剩余油在注泡沫以后,获得明显的动用,在油藏内形成一个从主流线向两侧扩展的油墙。采收率增值对应着泡沫液突破点,且在泡沫液突破之后有相对较长的低含水生产阶段。
Based on 3D physical modeling system for complicated driving system under HT/HP condition,the 3D physical simulation research on macroscopic flow mechanisms for multi-component foam flooding improving recovery factor has been done.With the application of differential pressure unit and saturation measuring needle in the model,the development results,pressure field and saturation field for multi-component foam flooding are measured.The fluid flow mechanisms in porous media for increasing swept efficiency and displacement efficiency during foam flooding are investigated.The mechanism of enhancing oil recovery factor for foam flooding is that the swept volume and oil displacement efficiency can be improved through Jamin effect.The whole pressure of the formation can be improved during foam flooding,and obvious pressure cone of depression nearby the wellbore can be appeared.After foam injection,the remaining oil on both sides of main diagonal line is distinctly swept,and an oil belt extending from the main stream line to both sides can be formed.Recovery factor increase is corresponding to the breakthrough point of foam fluids,and after foam fluids breakthrough there is a longer period of low water cut production.

关键词(KeyWords)： 泡沫复合驱;提高采收率;压力场;饱和度场;宏观渗流机理;物理模型
foam combination flooding;enhanced oil recovery factor;pressure field;saturation field;macroscopic flow mechanisms;physical model

Abstract:

Keywords:

基金项目(Foundation): 国家重点基础研究发展规划项目“大幅度提高石油采收率的基础研究”的部分成果(编号为G1999022511)

作者(Author): 徐晖,秦积舜,姜汉桥
XU Hui1,QIN Ji-shun2,JIANG Han-qiao1(1.Oil and Gas Engineering Academy

参考文献(References)：

• [1]侯吉瑞.化学驱原理及应用[M].北京:石油工业出版社,1998:168-170.
• [2]杨普华译.增效碱驱(复合驱)提高原油采收率译文集[M].北京:石油工业出版社,1993:36-47.
• [3]刘中春,侯吉瑞,岳湘安,等.泡沫复合驱微观驱油特性分析[J].石油大学学报(自然科学版),2003,27(1):49-53.
• [4]陆先亮,陈辉,栾志安,等.氮气泡沫热水驱油机理及实验研究[J].西安石油学院学报(自然科学版),2003,18(3):49-52.
• [5]吕广忠,刘显太,尤启东,等.氮气泡沫热水驱油室内实验研究[J].石油大学学报(自然科学版),2003,27(5):50-53.
• [6]王增林,王其伟.强化泡沫驱油体系性能研究[J].石油大学学报(自然科学版),2004,28(3):49-51.
• [7]周国华,宋新旺,王其伟,等.泡沫复合驱在胜利油田的应用[J].石油勘探与开发,2006,33(3):369-372.
• [8]叶仲斌,魏发林,罗平亚,等.泡沫增效三元复合驱油体系渗流行为研究[J].西南石油学院学报,2002,24(4):49-52.
• [9]张建国,雷光伦,张艳玉.油气层渗流力学[M].东营:石油大学出版社,2000:7-45.
• [10]赵福麟.采油化学[M].东营:石油大学出版社,1989:62-70.