王强,胡永全,任岚,赵金洲
WANG Qiang,HU Yongquan,REN Lan,ZHAO Jinzhou

• 1:西南石油大学油气藏地质及开发工程国家重点实验室

摘要(Abstract)：

为了精确预测水力压裂过程中裂缝及近缝储层温度分布,对经典裂缝及近缝储层温度场模型进行了改进。加入了两相渗流场,利用达西定律建立新的滤失模型,改变了滤失速度仅为时间函数的局限性,不再使用原有裂缝扩展模型,改用耦合渗流场的裂缝延伸模型,然后使用有限差分方法、迭代法对新模型进行了求解,并与经典温度场模型求解结果进行了对比。研究表明,压裂初期温度变化较快,对压裂液性能要求较高,滤失模型和裂缝模型的改变对温度场的影响较大。新模型更符合压裂实际环境要求,可为现场操作和技术研究提供可靠依据。
In order to accurately predict the temperature distributions of the fracture and its adjacent reservoir during the hydraulic fracturing,the classic temperature field model of the crack and nearby reservoir was improved:joined the two-phase flow field; established a new filtrating model with the help of Darcy's Law; changed the limitation that the filtration rate is only a function of the time; replaced the original crack propagating model and changed to use the extended crack model of the coupled seepage field. And then by means of the finite difference method and the iterative method,the new model was solved and moreover compared with the results of the classic temperature field model. The results show that the temperature changes rapidly in the early stage of the fracturing,the requirements to the fracturing fluid performances are rather higher,the changes of the filtrating and fracture models have a great influence on the temperature field. The new model is more in line with the requirements of the actual situation of the fracturing,so it can provides more reliable evidences for the field operation and technical researches.

关键词(KeyWords)： 水力压裂;裂缝;温度场;模型
hydraulic fracturing;fracture;temperature field;model

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金重大项目“页岩气动态随机裂缝控制与无水压裂液研究”(51490653)

作者(Author): 王强,胡永全,任岚,赵金洲
WANG Qiang,HU Yongquan,REN Lan,ZHAO Jinzhou

DOI: 10.19597/j.issn.1000-3754.201703080

参考文献(References)：

• [1]曾青冬,姚军.幂律型压裂液对裂缝扩展影响的数值模拟[J].大庆石油地质与开发,2015,34(3):81-86.
• [2]温庆志,李扬,徐希,等.水力压裂单缝中常用压裂液携砂液性能评价[J].油气地质与采收率,2015,22(4):123-126.
• [3]李阳,姚飞,姜歆.低渗透油藏压裂液的研制及应用[J].特种油气藏,2006,13(1):84-89.
• [4]Ribeiro P M,Horne R N.Pressure and temperature transient:hydraulic fracture well application[R].SPE 166222,2013.
• [5]Sheik A R,Rahman S S,Tran N H,et al.Numerical simulation of Fluid-Rock coupling heat transfer in naturally fractured geothermal system[J].Applied Thermal Engineering,2011,31(10):1600-1606.
• [6]Pak A,Chan D H.A fully lmplicit single phase T-H-M fracture model for modelling hydraulic fracturing in oil sands[J].Journal of Canadian Petroleum Technology,2004,43(6):35-44.
• [7]Whitsitt N F,Dysart G H.The effect of temperature on stimulation design[J].JPT,1970(4):493-502.
• [8]Wheeler J A.Analytical calculations for heat transfer from fractures[R].SPE 2494,1969.
• [9]Blot M A,Masse L,Medlin W L,et al.Temperature analysis in hydraulic fracturing[R].Journal of Petroleum Technology,1987,39(11):1389-1397.
• [10]Ben-Naceur K,Stephenson P.Models of heat transfer in hydraulic fracturing[R].SPE 13865,1985.
• [11]Kamphuls H,Davies D R,Roodhart L P.A new stimulation for the calculation of the in-situ temperature profile during well Stimulation fracturing treatment[J].The Journal of Canadian Petroleum Technology,1993,32(5):38-47.
• [12]焦国盈,赵立强,刘平礼.水力压裂中裂缝及近缝地层温度计算模型的改进与应用[J].大庆石油地质与开发,2004,23(3):68-70.
• [13]熊宏杰,任书泉.一种新的缝中温度场模型[J].西南石油学院学报,1986,8(2):14-18.
• [14]李平.水力压裂裂缝的缝中温度计算公式[J].天然气工业,1991,11(1):39-42.
• [15]李青山.水力压裂裂缝三维延伸数值模拟研究[D].四川南充:西南石油学院,1996.
• [16]赵梅.水平井压裂温度场研究[D].山东东营:中国石油大学,2006.
• [17]Lamb H.Hydrodynamics[M].New York:Dover Publications,1932.
• [18]England A H,Green A E.Some two-dimensional punch and crack problems in classical elasticity[J].Mathematical Proceedings of the Cambridge Philosophical Society,1963,59:489-500.
• [19]Longuemare P,Detienne J L,Lemonnier P,et al.Numerical modeling of fracture propagation induced by water injection/re-injection[R].SPE 68974,2001.
• [20]李勇明,罗剑,郭建春,等.有限厚度地层中水平缝滤失计算模型研究[J].大庆石油地质与开发,2007,26(1):97-99.
• [21]任岚,赵金洲,胡永全,等.裂缝性地层水力裂缝非平面延伸特征分析[J].中南大学学报,2014,45(1):167-172.
• [22]叶静,胡永全,任岚,等.裂缝性地层水力裂缝复杂形态延伸分析[J].大庆石油地质与开发,2013,32(5):92-97.
• [23]王鸿勋,张士诚.水力压裂设计数值计算方法[M].北京:石油工业出版社,1998:90-98.
• [24]张烈辉.油气藏数值模拟基本原理[M].北京:石油工业出版社,2014:155-157.