姚旭
YAO XU

• 1:大庆油田有限责任公司第二采油厂

摘要(Abstract)：

簇间距和段内簇数是致密油水平井分段压裂设计的重要参数。为了弄清簇间距和簇数对于致密油水平井压裂裂缝延伸的影响规律,建立了水平井段内多簇压裂数值模型,采用扩展有限元数值模拟了不同簇间距和段内不同簇数条件下的裂缝延伸形态,评价了簇间距和段内簇数对于裂缝延伸的影响。结果表明:随着簇间距的减小,裂缝的偏转程度会增大,同时会对中间裂缝形成抑制,影响中间裂缝的延伸;裂缝平均缝长与簇数的多少呈反比例关系,段内簇数越多,平均缝长越短;外侧裂缝的偏转角度与簇数的多少呈正比例关系,段内簇数越多,外侧裂缝的偏转角度越大。实际监测井底压力和压后产能测试表明,该压裂模型的数值模拟计算结果与实际数据偏差很小(0.5%～7.4%),模拟结果合理。
Cluster spacing and cluster number are important parameters for the design of the staged fracturing for tight-oil horizontal wells. In order to clarify the influences of the cluster spacing and cluster number on the fracturing fracture extension in the tight-oil horizontal wells, the numerical simulating model of the multi-cluster fracturing in the horizontal well intervals was established, the fracture extension patterns under different cluster spacings and cluster numbers within the interval were simulated respectively by the extended finite-element numerical simulation. And moreover the impacts of the cluster spacing & cluster number on the fracture extension were evaluated. The results show that with the decrease of the cluster spacing, the deflection degree of the artificial cracks will increase, at the same time, these conditions will restrict the formation of the intermediate cracks, and moreover the extension of the intermediate cracks will be inhibited;the average length of the cracks is inversely proportional to the number of the clusters, the more the clusters in the interval, the shorter the average length of the fractures;the deflection angle of the outboard fractures is in direct proportion to the number of the clusters,the more the clusters in the segment, the bigger the deflection angle. The bottomhole pressure and postfra productivity tests for the actual measuring wells show that there is little deviation between the mumerical simulation calculted results of the fracturing model and actual data(0.5%-7.4%), so the simulated results are reasonable.

关键词(KeyWords)： 致密油;水平井;分段压裂;裂缝起裂;数值模拟
tight oil;horizontal well;staged/multistage fracturing;fracture opening;numerical simulation

Abstract:

Keywords:

基金项目(Foundation): 中国石油天然气集团公司科学研究与技术开发项目“油气藏储层改造技术持续攻关专项”(2015CGCGZ002)

作者(Author): 姚旭
YAO XU

DOI: 10.19597/J.ISSN.1000-3754.201905021

参考文献(References)：

• [1]何鑫.致密油水平井压裂数值模拟及裂缝参数优化[J].大庆石油地质与开发,2018,37(3):158-162.HE Xin.Numerical simulation and fracture parameter optimization for the horizontal well fracturing in tight oil reservoirs [J].Petroleum Geology & Oilfield Development in Daqing,2018,37(3):158-162.
• [2]王发现.致密油水平井重复压裂技术及现场试验[J].大庆石油地质与开发,2018,37(4):174-177.WANG Faxian.Refracturing techique and its field test for the horizontal well in the tight oil [J].Petroleum Geology & Oilfield Development in Daqing,2018,37(4):174-177.
• [3]袁菁华.松辽盆地北部致密油体积压裂裂缝形成机理及控制方法[J].大庆石油地质与开发,2017,36(2):167-170.YUAN Qinghua.Forming mechanism and controlling method of the fractures for the tight-oil-reservoir volume fracuring in North Songliao Basin [J].Petroleum Geology & Oilfield Development in Daqing,2017,36(2):167-170.
• [4] 李士斌,官兵,张立刚,等.水平井压裂裂缝局部应力场扰动规律[J].油气地质与采收率,2016,3(6):112-119.LI Shibin,GUAN Bing,ZHANG Ligang,et al.Local stress field disturbance law of horizontal well fracturing[J].Petroleum Geology and Recovery Efficiency,2016,3(6):112-119.
• [5]曲占庆,田雨,李建雄,等.水平井多段分簇压裂裂缝扩展形态数值模拟[J].中国石油大学学报(自然科学版),2017,41(1):102-109.QU Zhanqing,TIAN Yu,LI Jianxiong,et al.Numerical simulation study on fracture extension and morphology of multi-cluster staged fracturing for horizontal wells[J].Journal of China University of Petroleum(Edition of Natural Science),2017,41(1):102-109.
• [6] 张汝生,王强,张祖国,等.水力压裂裂缝三维扩展 ABAQUS 数值模拟研究[J].石油钻采工艺,2012,34(6):69-72.ZHANG Rusheng,WANG Qiang,ZHANG Zuguo,et al.Research of ABAQUS numerical simulation of 3D fracture propagation in hydraulic fracturing process[J].Oil Drilling & Production Technology,2012,34(6):69-72.
• [7] 张广明,刘合,张劲,等.水平井水力压裂的三维有限元数值模拟研究[J].工程力学,2011,28(2):101-105.ZHANG Guangming,LIU He,ZHANG Jin,et al.Three dimensional finite element numerical simulation of horizontal well hydraulic fracturing [J].Engineering Mechanics,2011,28(2):101-105.
• [8] MOES N,DOLBOW J,BELYTSCHKO T.A finite element method for crack growth without remeshing [J].International Journal for Numerical Methods in Engineering,1999,46(1):131-150.
• [9] FRIES T P,BELYTSCHKO T.The extended/generalized finite element method:An overview of the method and its applications [J].International Journal for Numerical Methods in Engineering,2010,84(3):253-304.
• [10] 王涛,高岳,柳占立,等.基于扩展有限元法的水力压裂大物模实验的数值模拟[J].清华大学学报(自然科学版),2014,54(10):1304-1309.WANG Tao,GAO Yue,LIU Zhanli,et al.Numerical simulations of hydraulic fracturing in large objects using an extended finite element method [J].J Tsinghua Univ(Sci & Technol),2014,54(10):1304-1309.
• [11] 潘林华,程礼军,陆朝晖,等.页岩储层水力压裂裂缝扩展模拟进展[J].特种油气藏,2014,21(4):1-6.PAN Linhua,CHENG Lijun,LU Zhaohui,et al.Simulation of hydraulic fracture propagation in shale reservoir[J].Special Oil & Gas Reservoirs,2014,21(4):1-6.
• [12] 汪奔,王弘,张志强,等.基于XFEM的混凝土保护层锈胀裂纹分析[J].河海大学学报(自然科学版),2017,45(2):161-166.WANG Ben,WANG Hong,ZHANG Zhiqiang,et al.Analysis of corrosion-expansion-induced cracks on concrete cover based on XFEM [J].Journal of Hohai University( Natural Sciences),2017,45(2):161-166.
• [13] 王强,贺甲元.基于ABAQUS的压裂裂缝扩展模拟研究[J].油气藏评价与开发,2014,4(5):48-51.WANG Qiang,HE Jiayuan.Fracture spread simulation research based on ABAQUS[J].Reservoir Evaluation and Development,2014,4(5):48-51.
• [14] LIU Chuang,WANG Xiaolong,DENG Dawei.Optimal spacing of sequential and simultaneous fracturing in horizontal well[J].Journal of Natural Gas Science and Engineering,2016,29:329-336.
• [15] 孙可明,张树翠,李天舒.横观各向同性油气藏水力压裂裂纹扩展规律研究[J].计算力学学报,2016,33(5):767-772.SUN Keming,ZHANG Shucui,LI Tianshu.Study on the law of transerse isotropic reservoir crack extension during hydraulic fracture[J].Chinese Journal of Computational Mechanics,2016,33(5):767-772.