岳耀东,朱建伟,侯强,陈敬武,聂武杰
YUE Yaodong,ZHU Jianwei,HOU Qiang,CHEN Jingwu,NIE Wujie

• 1:吉林大学地球科学学院
• 2:吉林省油页岩及共生矿产重点实验室
• 3:大庆油田有限责任公司第九采油厂

摘要(Abstract)：

龙虎泡油田L126井区为典型的低孔低渗油藏,经过多年开采综合含水率较高。通过对L126井区油藏三维地质建模及精细油藏描述,认为高Ⅲ3层孔隙度、渗透率、有效厚度、砂体连通性及剩余油含量均较高,适合作为水平井目的层。设计了L126-P14水平井,位于直井L124-14与L124-15之间,水平段长度440 m,水平位移787.74 m,地层倾角0.3°~0.5°,目的层标准层垂深1 699.0 m,完钻垂深1 849.6 m,钻遇层段2 067~2 503 m。油藏数值模拟结果表明,L126-P14水平井与周围直井相比产油量提升明显,验证了水平井设计的合理性。
Well Block L126 in Longhupao Oilfield is characterized by the typical oil reservoirs with the low porosity and low permeability.After years of the production,the composite water cut is rather higher.Through the 3D geological modeling and fine reservoir description for Well Block L126,the porosity,permeability,effective thickness,sandbody connectivity and remained oil of Layer GⅢ3 are more higher,so it is suitable to act as the target layer of the horizontal well.Horizontal Well L126-P14 is designed between Vertical Well L124-14 and Vertical Well L124-P15,the length of the horizontal well interval is 440 m,the horizontal displacement is 787.74 m,the stratigraphic dip is 0.3°-0.5°,the vertical depth of the standard level of the target layer is 1 699.0 m,the drilled vertical depth is 1 849.6 m,the penetrated intervals are from 2 067 m to 2 503 m.The achievements of the reservoir simulation show that comparing with the surrounding vertical wells,the incremental oil production of Horizontal Well L126-P14 is enhanced obviously,thus the rationality of the horizontal well design is well verified.

关键词(KeyWords)： 龙虎泡油田;高Ⅲ3层;地质建模;数值模拟;水平井设计
Longhupao Oilfield;Layer GⅢ3;geological modeling;numerical simulation;horizontal well design

Abstract:

Keywords:

基金项目(Foundation): 中国石油化工股份有限公司“梨树断陷隐蔽油气藏分布规律与勘探目标评价”(P12025)

作者(Author): 岳耀东,朱建伟,侯强,陈敬武,聂武杰
YUE Yaodong,ZHU Jianwei,HOU Qiang,CHEN Jingwu,NIE Wujie

参考文献(References)：

• [1]刘波,刘振,王广运,等.大庆老区水平井地质设计方法[J].大庆石油地质与开发,2003,22(5):46-48.
• [2]吴永彬,张义堂,伍增贵,等.基于PETREL的油藏三维可视化地质建模技术[J].石油工业计算机应用,2007,15(1):21-24.
• [3]罗仁泽.油藏开发早期阶段储层建模技术研究[D].成都:西南石油学院,2002.
• [4]李毓,杨长青.储层地质建模策略及其技术方法应用[J].石油天然气学报,2009,31(3):30-35.
• [5]徐立明,牛新生.地质体三维可视化模拟的现状与展望[J].西南民族大学学报(自然科学版),2005,32(1):151-154.
• [6]薛云飞,陈勇,刘炳康,等.龙虎泡低渗透油田井网适应性研究[J].大庆石油地质与开发,2014,23(6):83-85.
• [7]杨玉芳,韩云洁,钟建华,等.松辽盆地长垣以西高台子油层沉积特征与油气分布规律[J].地质学报,2011,85(8):1377-1387.
• [8]黄尚军,杨帆,潘举玲,等.精细油藏数值模拟技术及应用[J].断块油气田,2002,9(5):40-42.
• [9]黄金姬.油藏数值模拟技术及系统[J].四川大学学报(自然科学版),1994,31(2):276-279.
• [10]王志明,陈月明.油藏数值模拟后处理软件的发展与现状[J].石油大学学报(自然科学版),1994,18(1):102-106.
• [11]牛彦良,李莉.特低丰度油藏水平井开发技术研究[J].大庆石油地质与开发,2006,25(2):28-33.
• [12]王书礼,唐许平,李伯虎.低渗透油藏水平井开发设计研究[J].大庆石油地质与开发,2001,20(1):23-24.
• [13]姬生柱,毕雪松,娄志石,等.多学科方法在优化薄油层水平井地质设计及现场导向中的应用[J].大庆石油地质与开发,2005,24(4):64-66.
• [14]韩来聚,牛洪波,窦玉玲.胜利低渗油田长水平段水平井钻井关键技术[J].石油钻探技术,2012,40(3):7-12.
• [15]赵静.吉林油田低渗油藏水平井开发技术[J].石油勘探与开发,2011,38(5):594-599.